Jump to content
SAU Community

Anybody Know A Good Headlight Reconditioner

Chris_GTR26
 Share

Recommended Posts

Chris_GTR26 Rising Star

Chris_GTR26

Posted
Posted

hey guys..

have this ugly ass mark on my headlight and i was wondering does anybody have a well trusted headlight reconditioner...

and if anyone could post up pics of there work would be great...

cheers chris.

Link to comment
Share on other sites
  • 4 weeks later...
HGS130 Enthusiast

HGS130

Posted
Posted

i did this to my headlights-

use really fine sand paper and rub it all down, give it a wet wipe over a couple of times then use cut and polish and it should look close to new.

works a charm for me, so i take no responsibility if this doesnt work for u.

Link to comment
Share on other sites
Chris_GTR26 Rising Star

Chris_GTR26

Posted
  • Author
Posted

yeh iv tried the cutting compound but still didnt work.. i think its in the inside of the headlight..

id rather get a pro to do it as its the series 3 headlights and i know they r expensive so i dont wanna stuff em up lol

but thanks for the help !!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Fake ARP bolts?

      By TurboTapin · Posted

      Yes sir, that was me. Fake ARP's are also a thing over here in Canada and we only order from reputable dealers. It's sad that even simple things like bolts and hoses are now also being copied... anything to make a dollar.  Story time. Like all cheap crap from China, it's even an issue with firearms. Roughly 15 years ago, I purchased a new cheap Norinco 12g shotgun. First time out in the bush with it, while firing, bolt assembly didn't lock and it fired out of battery. The receiver also being cheap steel, basically exploded in my face. I was lucky to be wearing eye protection. Long story short, don't buy Chinese junk. Also Norinco being state run and their only military arms producer, if ever they do try and take over a country, don't worry about it lol. 
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      Newcastle NSW
    • ck_chino
      Nismo copper mix twin “pull” pedal height engagement

      By ck_chino · Posted

      Installed  Nismo coppermix twin competition spec last year in my bnr32 with pull trans with Oem slave cylinder. The point at where the clutch disengages/enages is right at the top of the clutch pedal, meaning I barely have to push the pedal down for the clutch to be disengaged.  You guys that have the same combo are you experiencing this high pedal bite point??   Secondly I’d like to have the disengagement point lower meaning I have to push the pedal more(further not effort)for it to be disengaged.  I’m thinking to use a Nismo big operating cylinder(bigger bore at 13/16 vs Oem 3/4) which will require more pedal stroke to get the equivalent movement at the clutch fork. But I see Nismo web site says not to mix these 2 as the Nismo big operating cylinder doesn’t have enough stroke to disengage??? Any folks run both the coppermix twin pull with Nismo cylinder??    Thanks in advance for the replies but prefer only guys with pull clutches to respond. thanks     
    • Watermouse
      RB gearbox options

      By Watermouse · Posted

      Any chance u could let us know where your based ?
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      That’s a great deal and I would jump on it if you were closer. Melbourne is a bit of a hike for me though unfortunately 
×
×
  • Create New...