Fs: Highflowed Vg30 Turbo

[HR31_RB20DET]

VG30 Highflowed turbo (OP6 rear housing) built by Precision Turbochargers, running t04b internals and is plain bearing. Has done approximately 8000 to 10,000k's in the last 1 and a half years which most of the k's being highway driving. But other then general street/highway duties, this turbo has done 3 drag meets (about 15 runs) and a couple of hours on the dyno.

This turbo on my RB20 was making 300rwhp on 18psi, though on a RB25 I'd expect closer to 350rwhp on 18psi.

This turbo is in great condition, has the same amount of shaft play as when first installed.

Also includes a modified oil line which is need to run this turbo aswell as the banjo bolts on the turbo side for the water in/out.

All thats needed to bolt this turbo on is the elbow and the metal oil drain pipe off an RB25 turbo.

NOTE: Also if required I can supply a R33 RB25 actuator.

Asking $900 + postage.

Located in Ipswich QLD (just outside Brisbane)

Please PM for further info.

[32_Dave]

when is full boost? does it have a modplate?

thanks,

dave

[HR31_RB20DET]

Hey Dave, Nah it doesn't have a build plate.

On my RB20 it started making boost at 3000rpm and made 18psi around 4300-4500rpm, though on an RB25 I guess it would come on 500rpm earlier then a 20, so say 18psi around 3800-4000rpm.

[HR31_RB20DET]

Bump...

[HR31_RB20DET]

Bump...

[R33 Eddy]

If you still have this around tax return time i may have the money

[Nismo_Boy]

when is full boost? does it have a modplate?

thanks,

dave

This is almost identical to what I was running on my rb20, made around 8 – 10psi at about 3000rpm.

[HR31_RB20DET]

Price drop on turbo to $800.

[HR31_RB20DET]

SOLD...