Jump to content
SAU Community

Recommended Posts

AHHHHHHHHHHH i think you will find, shell FTG (ferntree-gully) still sells V-power racing, almost certain (:S)

stopped using it 2 months ago, after i retuned baack to 98RON.

not 100% sure its still there, but they were the ONLY ones to have it when i needed it.

indeed because most of the "air" is not oxygen

Octain rating amongst other things is the oxygen content in fuel, the high the oxygen content the more complete the burn

the more complete the burn the more "perfect" the combustion

Theoretical all that will be given off should be h20

Of course this is not possable in real world what i was try to show was

I find it funny that a so called "better" higher quality fuel that will produce a more complete burn would be dis allowed to be used or sold because of tighter controlled emission regulations

unless of course its all a con

indeed because most of the "air" is not oxygen

Octain rating amongst other things is the oxygen content in fuel, the high the oxygen content the more complete the burn

the more complete the burn the more "perfect" the combustion

Theoretical all that will be given off should be h20

Of course this is not possable in real world what i was try to show was

I find it funny that a so called "better" higher quality fuel that will produce a more complete burn would be dis allowed to be used or sold because of tighter controlled emission regulations

unless of course its all a con

Ahhhhhhh, no.

First Octane rating is a number derived from a petrols ability to prevent knock. It has no direct correlation to the fuels formula. Once a fuel is tested it's knock prevention is compared to varying concotions of iso-octane and heptane then given a RON based on what % of iso-octane is required to mimik the fuels knock prevention ability.

Secondly, when you combine a hydroCARBON with oxygen you will get water AND a carbon derivitive, ie. Carbon Monoxide. Always. Without fail. Everytime. It's basic chemistry.

AHHHHHHHHHHH i think you will find, shell FTG (ferntree-gully) still sells V-power racing, almost certain (:S)

stopped using it 2 months ago, after i retuned baack to 98RON.

not 100% sure its still there, but they were the ONLY ones to have it when i needed it.

Um, if that's the case then they are breaking the law because V-Power Racing has not been made for nearly 3 years, and if they still have stock of it in their tanks (highly doubt it) it is going to be that old and very very bad quality fuel with all sorts of nasties in it. They will more than likely have Vpower 98 in there and if it's still selling for 5c per L more than normal Vpower they are false advertising as there is no more VPower Racing. You'll probably find it's the same price as normal VPower and that will be because thats what is being pumped out, they ,ay still have the signs up and the bowser cards in place saying Racing but I can assure you 99% that it's not Racing, the 1% is for the 3 year old stale left over (which again is unlikely because it would destroy your engine and would be taking up tank space that they could use for other fuels)

There's a slight difference in how they refine their fuels. You'll also notice, shells fuel is actually red and BP is actually blue/green. I might be speaking through my ARSE with the colours, but that's what I noticed on my fuel cap after a period of time...

There was some test done somewhere regarding the rating and additives they use, shell came up top.

I love Shell in my car but every bike I've ever owned friggin' hated it.

My NSR seized twice (both times were the only times I ever put Optimax in it...coincidence?), my XR would cough and splutter and also seized although I had run Optimax previously and my blade would cough and fart and carry on until about 7000rpm when it would clear it's throat and go like the clappers.

Conclusion?

Optimax -

Car = yes!

Bike = no!

There's a slight difference in how they refine their fuels. You'll also notice, shells fuel is actually red and BP is actually blue/green. I might be speaking through my ARSE with the colours, but that's what I noticed on my fuel cap after a period of time...

There was some test done somewhere regarding the rating and additives they use, shell came up top.

I could have sworn the colour coding was there for a different reason.

I know leaded race fuels have a red colour and unleaded has blue or something along those lines

Back to back testing resulting in about 3-5 deg of timing retard required across the range from switching from BP ultimate to Shell V-power on my mates race car (SR20 putting out about 240rwkw about 20rwkw drop in power with Shell V-power).

He is now running ultra high octane race fuel now I think about 113ron and picked up another 40rwkw over BP ultimate different days different dynos different tuner.

I could have sworn the colour coding was there for a different reason.

I know leaded race fuels have a red colour and unleaded has blue or something along those lines

fuels are actually clear, they put colouring in them for a safety reason, basically so you don't accidentally drink it lol! I'm pretty much sure the smell would put you off if you tried! unless you live in NT! Oh no I didn't lol

i use to not care when i first got car what i used. as in brand of petrol but after testing different ones out i cannot stand any shell petrol. makes any of my cars ive had run like absolute shit. only and ever use BP Ultimate 98. cars run awesome on it even had 1 car tuned to it as im happy with results

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How to wreak havoc at a bogans party... Swap out the goon bag hanging from the clothes line with oil bag... Watch chaos ensue during Goon of Fortune....
    • Hey everyone,   I’m looking for some advice on replacing the timing belt on my RB25DET Neo-powered 1998 Skyline. The engine was fully built about five years ago, including a fresh timing belt, water pump, and other essentials. However, since then, the car has only covered around 2,000–3,000 miles. It’s currently making around 650hp.   Even though the mileage is low, I know timing belts have a time-based lifespan too, and most recommendations suggest changing them every five to six years or 50,000 miles. Since I’m at that time mark, I’d rather not take any risks and plan to swap it out soon.   A few things I’d like to hear opinions on: 1. What’s the best belt for this setup? Should I go with an OEM Nissan belt, or is the HKS fine-tune a better choice given the power level? 2. Would you bother replacing the idler pulley and tensioner at the same time, or only if they show wear? 3. When swapping the belt, is it necessary to lock the cam and crank gears in place, or is lining up the timing marks enough? I’ve seen different approaches, and I want to make sure I do it right.   The water pump was changed with the rebuild and isn’t run off the timing belt, so I don’t see a need to replace it again. I just want to make sure I approach this the right way.   Any insight would be much appreciated. Thanks!
    • How does this compare to the internally gated g25-550 in terms of power production at same psi and spool
    • Did you find that your voltage of the battery wasn't where it's normally supposed to be? for example on my r34, it's at 14.5v when running after a few seconds, but I noticed when I had a rough start and it initially wasn't idling correctly, the voltage on my triple gauge cluster was showing lower than usual. Seems like the alternator is starting to crap itself
×
×
  • Create New...