Jump to content
SAU Community

Will R32 Gtr Front Hubs Fit R32 Gtst?

wlspn
 Share

Recommended Posts

wlspn Proficient

wlspn

Posted
Posted

Have searched for threads on this but had no luck.

Read somewhere on here recently that 32 GTR rear hubs are alloy & around 2.5kg lighter each than 32 GTST items. Apparently with GTR rear coilovers & LCAs ( or some modifications to OE) they can be fitted to the GTST reducing unsprung weight & also allowing more choice in coilovers.

Am looking into doing this but anyway, my question is, are 32 GTR front hubs also alloy & can they be fitted to a 32 GTST? If so, what modifications are needed? Has anyone done this?

I have a munted wheel bearing knocking like the wheel is going to fall off & can get hold of GTR front hubs very cheap.

Therefore if they are an upgrade & are able to be fitted (with light modifications even) I would obviously prefer to go with these rather than repairing my originals...

Any help would be appreciated!

Cheers,

Brett

sr_ceffy Apprentice

sr_ceffy

Posted
Posted

[

no you cant fit gtr front hubs to your 32 gtst unless your converting it to awd and i doubt you will notice the difference in unsprung weight changing to gtr rear hub assemblies there is like sfa difference in weight and as for coilover options you can get a huge variety for a gtst 32 so all in all you should just buy new wheel bearings for your front hubs and be done with it

wlspn Proficient

wlspn

Posted
  • Author
Posted

Thanks for info on front hubs. Will take my chances with rears.

As I mentioned, have been told from several knowledgable people on here that hub assemblies are around 2.5kg lighter each...

& I'm sure I've read somewhere (correct me if I'm wrong) that removing x amount of unsprung weight is equivelant to removing something like twice the amount of sprung weight. e.g. Removing 5kg unsprung is similar to removing 10kg sprung.

People get all excited about losing 5kg (or less) weight from c/f bonnets, etc so I think it's worth it. not expecting miracles but it all helps. People also pay HUGE money for lightweight wheels, companies like Porsche spend HEAPS developing carbon/ceramic brakes all to reduce unsprung weight...

sr_ceffy Apprentice

sr_ceffy

Posted
Posted

yeh thats true but your talking about the pinnacle of motorsport with a street car your going to notice sfa differnce unless you go light weight with everything which in turn reduces it to not being a street car i think you will be disappointed with the effort involved youd notice more of a differnce striping the interior anyways its up too you this is just my train of thought

  • 14 years later...
Daquavuis Rookie

Daquavuis

Posted
Posted
On 06/05/2010 at 8:45 AM, wlspn said:

Thanks for info on front hubs. Will take my chances with rears.

As I mentioned, have been told from several knowledgable people on here that hub assemblies are around 2.5kg lighter each...

& I'm sure I've read somewhere (correct me if I'm wrong) that removing x amount of unsprung weight is equivelant to removing something like twice the amount of sprung weight. e.g. Removing 5kg unsprung is similar to removing 10kg sprung.

People get all excited about losing 5kg (or less) weight from c/f bonnets, etc so I think it's worth it. not expecting miracles but it all helps. People also pay HUGE money for lightweight wheels, companies like Porsche spend HEAPS developing carbon/ceramic brakes all to reduce unsprung weight...

Did it work? i want to swap R34GTR rear hubs onto my r34GT lmk asap 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...