Jump to content
SAU Community

Recommended Posts

Hi,

My bro just got his new line and we were intrested to see what the turbo looked like to compare to other bros turbo.

and we noticed that the fins look different and are bent and chiped ?

is this a problem ? do we need a new turbo ?

their doesnt seem to to be and problem when driving, all though it sounds different when it spools up you can hardely hear it, it doesnt make the whistling sounds like the pod but its a different sounds ?

Thanks,

by the way its on a 95' gtst

(i'll post pics later tonight)

Link to comment
https://www.sau.com.au/forums/topic/31865-damaged-turbo-wheel-r33-gtst/
Share on other sites

Well if you go two turbos off the same series motor.

then you can bet your dollar it's a bit damaged.

chipped is not all that good.

Fins can have a 'bent' look. it might just be the wheel.

I dunno what the differences are between the two though... series I vs II.

but i think there was something a tad different.

either way for a new one you only looking at $400

hi

I think I might be having a problem with my turbo too...

It looks ok the last time I checked it..

but at higher speeds.. about 200km/h + there's a really loud shhhhhhhhhhh sound... quite unnatural...

not sure whether something's wrong with the turbo or the blow off valve...

I'm running on standard turbos and turbosmart BOV..

anyone experienced this before?

thanks

That turbo has ingested something, but if it still goes, then keep using it, unless you really want to upgrade. These turbos are generally, not very servicable or rebiuldable. But they are quite tuff. It could keep working fine for years to come. Look at it this way, you only found the damage, coz you looked....you didnt hear any strange noises or see oil or anything.

You can if you want, buy a new comp wheel and get it fitted and balanced, but Personally I woudlnt bother, the time and money isnt worth the problem if the wheel fails. I doubt you would notice the drop in power at all.

I have been playing (that should read, trying to fix:P) a couple of rb25det turbos, and have found the following info....

If you break the seal plate, you can't get a new one (oh no!) If you own a lathe, you can make a new one (doing that now actually)

The turbine is not able to be serperated from the shaft, and is balanced as a single unit

The comp wheel is balance as a single unit, and therefore, you can generally swap wheels with not too much hassle (if you dont balance them, you will get a shorter turbo life, but generally, you will get away with it)

IF you pull apart totally the bearings, (they are not captive bearings) the balls will fall out and roll across the floor, into the drain, cracks in the concrete etc etc, bye bye turbo....

If you can feel shaft play sideways or end ways, the bearings are worn, but if your lucky, you can still have some more room to tap in the centre peice of the comp wheel side bearing (under that damn seal plate im afraid, hard to take them out without breaking them) and get rid of that play, and get another 100 000 kays out of a unit.

Worn bearings and side play and end play in the shaft leads to misalignment of the seals, which of course leads to oil leaks, smoke, etc....

by the way, I picked up a second hand turbo for $200 on the weekend and fitted it to my twin turbo rb25dett VL and it fixed my problem.

So as you can see, spending money at a turbo shop rebiulding a stock rb25det turbo is not a financially rewarding thing to do. Its better to just source a second hand one.

I had two good turbos, untill one started leaking oil into the air intake. Upon trying to fix that turbo, i broke the seal plate. Bought a buggered turbo for $70 and broke the seal plate in that trying to get it out too! :P (DOH)

Bought another good turbo for $200 and fitted it and no worries.

Now im making two new seal plates, using two new o rings, and setting up the bearings in those two turbos again, to see if i can get those turbos operational again. If not, ill turf them:P

black smoke is fuel not oil.

why should it boost higher than standard boost? you got a bleed valve hooked up?

If you have and its refusing to boost very high, it could be any number of alot of other things. I've never seen a turbo that is in such a state that it wont boost higher than standard boost, unless its really stuffed (turbine hitting houseing, seized bearings, etc)

They seem to either work fine, or dont.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
    • Yes, a plan for non-action is always my first sort of plan! I'm happy to see what falls out of invision's update. I had been having some thoughts on what to do with this the other day and they all seem to have fled my memory, after various solar panel induced traumas, squeaking suspension sphericals, etc etc, over the last little bit. I'll try and recall what I had in mind and make sure that I put it into print in some form before the Alzheimer's strikes again.
    • The ability to have both a 5500 stall for launching, and a regular lockup for every other scenario is pretty sweet. Does it actually work well like that though in the real world? Would it hold up to track use and otherwise you'd never know you had a stall converter in it? If so, that's awesome
×
×
  • Create New...