Jump to content
SAU Community

Recommended Posts

Hi,

Ive recently bought a r34 25gt, the previous has removed the original muffler and replaced it with some cheap dodgy one. I am planning on replacing it.Do you guys have any suggestion from something that is value for money? I am also on my red p's. will I become cop bait, if i change it?

Thank you

Link to comment
https://www.sau.com.au/forums/topic/318682-muffler-suggestion/
Share on other sites

If I was you I would be replacing the system from the cat back. You'll be able to either get a custom one made up or perhaps find an aftermarket japanese system on the forums etc.

Most people will tell you not to go any bigger than a 2.5" system on an NA car like yours however I'm running 3.5" HKS on my RB25DE and my mate has a Blitz system which is 3" and they both perform fine. That said, my brother is using a custom 2.5" catback system and I can definitely notice more response and power down low in the rev range.

How much do you have to spend? A custom mandrel bent catback from an exhaust shop will probably charge you around the $500 mark give or take a little?

Hope that helped a bit.

i'd go something like a 2.5" lukey performance flow. it's an oval muffler and not a cannon, so should help reduce police attention. also being an oval muffler it will be a touch quieter than a cannon. i recently got one put on my SSS pulsar and along with 2.25" piping (and 2.5" muffler) it is quieter than the old 2" system that was on there with a smaller bodied 2" oval muffler. also shouldn't cost that much to get fitted. i was quoted $120 for muffler and fitting at my local muffler place, but ended up being a bit more cause i got the extra piping done (ended up being $170 all up)

I love magnaflow mufflers, look and sound. Oval straight through centre offset, they're a mandrel preforated pipe that are fibreglass packed and use absorption to reduce noise, and that type of muffler (straight through) gives the best performance (minimal backpressure).

I've got a satin stainless one at the rear, and the biggest (longest) hotdog resonater i can find before the diff. It's a 3" system on my RB30DE, sounds unreal, you'd obviously be after a 2.5" though.

http://www.magnaflow.com/02product/univers....asp?shape=oval

http://www.magnaflow.com/02product/shopexd...ain&id=8517

My car is quite loud (however its slightly different to a standard rb25de) but has absolutely no drone, it just rumbles down low and screams with revs. I'll change the hotdog to a centre/center straight through at somepoint, just to quieten it down so its more street drivable (when i want to street drive it, down the track).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on exactly where that voltage is being measured, that is most likely the battery is f**ked. If the multimeter probes are on the battery's own terminals, then it is f**ked. If they are on the car's terminals, then there is a bad connection. Either are fatal to the attempt to start it. Literally just put it on the 20VDC range, put one probe on the battery's -ve terminal (ideally not the car's terminal) and the other on the block somewhere exposed/metal, like an engine mount bolt head. You can also test the earth lead is steps, so from battery to body earth, body earth to engine connection point, engine connection point to some other spot on the engine, to see if you can isolate where a shit connection actually is.
    • I meant to write 50 originally and then double checked the price and found it was ¥12m (125k) and came to edit it and realized I had accidentally added and extra 0 in the first place lol 
    • I wonder if the n1 was cheaper when bought new 
    • Only reason I started replacing hoses was I went for a short drive to the shop the other day and finished shopping and started the car and started to drive off and could see a big trail of fuel in the rear view mirror. Parked up and found the bottom hose to the fuel filter had busted. Lucky I was near a car part store and was able to get a replacement hose and back on the road. But got me thinking I had owned that car for around 20 years and was all original fuel hoses so probably time to replace all of the fuel hoses. Was pretty lucky it went where it did.
    • A few kg falling from a few feet is enough to move parts of your skull inwards into your brain Also, there's always news about people getting crushed, and occasionally killed, working under cars Be safe is your endeavours 
×
×
  • Create New...