Jump to content
SAU Community

Recommended Posts

Yeah wont be dealing with him again but will be taking the bill to fix the engine to him.

The engine was built by Pro Engines and seems to be the goods but would have been nice to get it to the track. I have recently picked up the car and all parts after being pulled down and assessed for damages. So now i have to choose if I fix it as a 3lt of wait for the spool 3.4 kit.

And once the engine is all fixed up do I put it back in the 33 and run the 10 I was always after or put it in a 260rs stagea....

As for driving it, it has done less than 50ks on the street with a run in tune and was great to steer. So take off in 1st get it on boost, pull 2nd = wheelspin, pull top and more wheelspin. lol

That was with about 300rwkw running 10psi and 6000rpm

A stag that can run 10's would be a pretty nice thing to daily drive!

How do you find driving it on the street with the auto?

I love the auto. Best thing I ever did to the car.

Would be nice to change the diff gears from 4.1 to 3.7 to drop the revs on the highway.

I went to the drags here last weekend and was inspired to fix it for the 33 just to blow away the dirty V8s. lol

what do you guys think about a gt3582 with .63 rear on a rb25-30? will it choke it up or anything? its a standard bottomend rebuild and rebuilt standard head. just deciding on the turbo to use now coz i dont wanna make too much power (dont wanna go over 450rwhp on standard motor) and cant decide what turbo coz i want it in its good efficieny range but dont wanna make like 500rwhp on 18psi or anything like that. had a t04z .84 t3 off proboost but sold it before i used it and got the motor done. thinking of going another one of them but i dunno.

i will get one off the proboost guy probably coz there good prices and are meant to be real good. i dont think he can sell me a 3582 in anything except .63 rear.

Use the .82 housing mate. the 30 bottom end brings it on boost almost instantly. I reckon you would regret the smaller rear housing.

or even a 3076 with a .82 rear.

friends supra is running that setup and it drives like a stock turbo except that it makes 300kw

does anyone know whether I can use rb20 engine mount brackets on an rb30 into an r32 gtst? I haven't put it in the car to test it, but it looks like the engine will sit on a huge lean?

I've tried searching but can't find any solid info, the pdf doesn't specify which brackets to use.

the gt3582 the guy sells is only available in .63. its not garrett but meant to be good. will it be ok or should i get something else?

might get another t04z with .84 t3 flange. any ideas on what power it would do on my rb25-30 with na pistons and standard head? on about 18 psi id probably run otherwise it wouldnt be in its efficiencey range possibly i dunno about them that much. just worried about making too much power for the motor and on the other end of the scale dont want it to not be working in its proper range. will crank it up later once i get another motor or some more money so i can replace it if it blows the motor.

im going to get the t04z with 0.84 t3 rear on it. want to get 400-450rwhp for now. how many psi should i run do yous think. i wanna get the spring in my wastegate for what boost i wanna run. dont really wanna go over 450rwhp coz i spent abit rebuilding the bottomend. has mahle cast pistons and king bearings. 40 thou over i believe.

will live with the extra lag for now and crank it up more when i get another motor ready or get more money and see what this one will do. only wanna buy 1 turbo so will go the big one straight away.

the guy says his 0.63 gt3582 will do 400-430rwhp on 18psi. still would like some info from you guys on how that will go on the rb25-30 in regards to the rear choking up the motor and stuff like that. just went back into my mind about going that one maybe. need info and examples of how itl be off ya to help me decide.

How long is a piece of string. Your tuner will tell you what boost you will need to achieve the power figure you are looking for mate.

I am using the 35r with the .82 housing and have 470 rwhp at only 18 lb. Response is off the hook.

THis combo still has my vote for the best response/power package.

How long is a piece of string. Your tuner will tell you what boost you will need to achieve the power figure you are looking for mate.

I am using the 35r with the .82 housing and have 470 rwhp at only 18 lb. Response is off the hook.

THis combo still has my vote for the best response/power package.

i would be going the .82 gt35 if the guy could do one but says he cant. so its either .63 gt35 or t04z with t3.

whats done to your one to have that much power?

might just go 17 or 18 psi spring and it makes what it makes. havent picked my tuner yet. will be seeing one guy during the week

i would be going the .82 gt35 if the guy could do one but says he cant. so its either .63 gt35 or t04z with t3.

whats done to your one to have that much power?

might just go 17 or 18 psi spring and it makes what it makes. havent picked my tuner yet. will be seeing one guy during the week

I dont follow, gt35r is an off the shelf item with whatever housing you want Joe. Anyone can get one.

As for mods, its built with all the usual add ons. Head is quite mild. Building another full house head for it atm so we can really lean on it.

I dont follow, gt35r is an off the shelf item with whatever housing you want Joe. Anyone can get one.

As for mods, its built with all the usual add ons. Head is quite mild. Building another full house head for it atm so we can really lean on it.

im buying off the proboost guy. he sells his turbos to a rotary shop and has had his turbos on a few good cars running good times.

the gt3582 he sells he can only get the .63 rear housing. its like this one but there now got surge porting. http://www.proboost.com.au/level2.asp?view...lanttype=Turbos this is what the ones he has now looks like if the ebay link still shows the listing anymore http://cgi.ebay.com.au/Nissan-SKYLINE-turb...=item19bb2c660d

i already have the manifold and wastegate i got off him last year and never used and sold the t04z t3 i got off him at the same time. so im just about to finish the motor and buy turbo again.

dunno if il go the gt3582 kit as listed or get the to4z for $785+$90 for water coolded core. thinking i could go the gt3582 kit for $850 then sell the spare wastegate and manifold to make it cheaper. can also get the 3582 with t66 wheel, used to be able to anyway.

so id like some info on how itd go with the .63 gt3582. might go that for ultimate response and over 400rwhp but dunno much about turbos to know if it will be a restriction and end up not being that good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, thumbsup from me. The distant shot of the bay just looks same-same as before.
    • Dad had a court case drag out with them from 1998 to 2004. He was in a not at fault accident, NRMA were the ones who covered the other person. They tried to blame his neck injuries on the fact he'd had an injury in 1981 on his extreme lower back where he slipped a single disc right near the bottom. Had been all cleared from that injury for years. This accident destroyed his shoulder, and f**ked a heap of discs in his neck, and he still has major problems with it to this day. Sarah's sister while on her L plates had a small Suzuki Alto, she had stopped to give way to an ambulance, and someone changed lanes behind her because there lane was also slowing, and rear ended her at 80km/h. (She had been stopped for a few seconds already too!). Car was completely f**kED. NRMA sent the vehicle around to 3 different workshops as they kept claiming "We believe it can be repaired, and not written off, we just need to find the correct workshop". It took 3 months, and a lot of arguing before they'd concede and wrote it and paid out. About two years later her sister had a Lancer, someone pulled out of a stop sign without stopping (in an 80 zone). Her sister swerved, hit the front of the other persons car (Instead of dead t-boning the drivers door), which ramped her Lancer, and made it roll multiple times down the road. It hit every panel on the way through. Her sister had slid her self out of the car, and remembers the ambos walking to the accident (They'd been sitting at a set of lights just down the road and witnessed it) and they were saying "Well, this ones going to be a fatality, no way you can walk away from that". Well, she did. And then NRMA sent two assessors out to look at the car, both of which wrote it off. They tried to send another assessor out, except a HUGE uproar was raised, and they FINALLY paid it out. That was on a car, that had damage to EVERY panel, you could see from 100m away the whole car was also twisted, roof bowed etc. Nah, we'll try get out of needing to payout on a $10,000 car... Her sister ended up with major shoulder reconstructive surgery being required, and was permanently limited in her ability to do her job as a nurse after that, as she can't (And was told before surgery too this would be guaranteed to happen) regain full strength in that shoulder. However, there was no choice to not have it, as she could barely use her arm, which was her dominant one, and was in near constant major pain. (And she's the type of person that would try and walk off a broken leg!) NRMA did the biggest run around on the personal injury side too for about 18 months, even to the point of trying to put 100% blame of the accident on Sarah's sister, even though the other driver admitted she didn't look, and didn't stop, and was charged by the police. Sarah used to have a Barina insured with them. It was a policy setup, paid all 12 months in advance. At the end of the 12 months, Sarah was living with me, I reviewed the renewal, it clearly stated "If you do nothing, your policy will cease on XYZ date". We did nothing, as we moved her insurance in with all of mine and I was with Shannons. We find out 10 months later, NRMA decided, because he DAD had a car insurance policy at the same address as what Sarah's mailing address was (Garaged address had been changed), that they'd put Sarah's (What should have been non existent policy) onto her Dad's month to month charges on his credit card. We had to jump through hoops, to get a refund. They didn't care that we actually found the letter that said "If you do nothing, your policy will cease" they made us prove we had NON COMPULSORY insurance else where before they'd issue the refund, and after they agreed to the refund, it still took another 6 weeks and 3 more phone calls for them to actually process it. They also had two insurance claims from storm damage, and they were an absolute cluster to get resolved as well (one vehicle, one house). Some how, up until about 3 years ago, her parents were still loyal to NRMA too, and we were like "How the hell are you so loyal to staying with them, when other places are so much cheaper, and they've f**ked you over every time you've ever had to make a claim?"
    • I got the four AN10 fitting welded up to the cam covers and started up making the head to sump breather/drain lines. The front passenger side cover I used a 45 up top and a 90 at the bottom into the stock VCT head drain spot (3/4" BPST to AN10 adapter) thats unused on the RB25DET NEO with some speedflow flame shield to protect it from the manifolds heat.   back passenger side was a 90 up top with some flame shield and 45 at the sump end. The rear drivers is 45 at both ends   the front drivers fitting is capped off for now but ready to go if i want to try moving the breathers around. I was told by the fabricator to leave all the welds raw for now to make sure there are no pin hole leaks. A lot of cleaning up, re bundling looms and degreasing to go as well as final assembly on the cam cover baffles. The first real test will be 28th March at a Circuit event. added complexity and more spots for leaks but overall looks relatively neat imo
    • Yeah i think the dash needs to come out. To get the loom or maybe just climate control and radio cluster. My mirrors are done i think the motors don’t work so well after flood haha i need the ac fan, you said you wanted to keep it for your 31 and interior loom not including boot. The wiper motor. I’m not sure how good the window surrounds are on the exterior on the pintara.  I will message you to get your bank details shortly 
    • Just another barrier put up to stop cars being modified. When we're all driving Chinese sewing machines, you won't want to modify it anyway, and you'll likely already have slashed your wrists and be locked up in a padded room for your own protection.
×
×
  • Create New...