Jump to content
SAU Community

Recommended Posts

Hey, Im sorry if this sounds like a really stupid question that anyone with a license should know, but I have just never been sure.

When your tyres say 55PSI Max press, does that mean it would be best for me to fill it to 55? Or does it mean thats just the max it can handle, but I should be putting in 50?

Or am I way off and theres an ideal PSI such as 43 for certain sizes or something like that?

I know your tyre pressure has an affect on petrol consumption, but im also told that your tyre pressure can have a HUGE impact on your speed and acceleration, so I was wondering about all this.

Thanks for any answers

Link to comment
https://www.sau.com.au/forums/topic/318811-max-psi/
Share on other sites

they're just the stock tyres, so im gonna assume the figures that cancer gave were right under that assumption?

I was recommended 38-40psi on 235/45/17 if that helps, 40psi was for an advanced driving course at Sandown, but everyone seems to recommend a slightly different amount so you will have to experiment :P

Link to comment
https://www.sau.com.au/forums/topic/318811-max-psi/#findComment-5211170
Share on other sites

Experiment mate, but always gauge it on the tyre profile rather than wheel size.

With standard tyres anywhere from 32-36 will be fine. Low profile (35/40) anywhere from 38-44 is not uncommon.

When you get to know more about it, you will use different pressures for different situations. A good test you can do is to inspect the tyre wear after some time...if you have too much wear on the sides of the tread it means your pressures are to low, too much wear on the centre of the tread and your pressures are too high.

Link to comment
https://www.sau.com.au/forums/topic/318811-max-psi/#findComment-5211364
Share on other sites

There is quite a bit of info on this around the web, a lot of people state the best tyre pressure for your tyres in terms of performance, wear and comfort is the MAX pressure stated on the sidewall of the tyre minus 10%. So under that assumption it would be 55 - 5.5 which is 49.5PSI. That seems a bit high for me, I would stick to between 36-40 PSI cold pressure.

Link to comment
https://www.sau.com.au/forums/topic/318811-max-psi/#findComment-5221250
Share on other sites

WOW!

Are you guys serious?

I run 45-50psi on the rears at the track when I go drifting.

And about 32-34 at the front

(16" rim, 205-55)

It depends very greatly what press to run.

Factors like wheel alignment, driving style, driving conditions, quality of rubber and what you want to get out of your rubber.

Have a look at the tyre wear on the rubber, where is it wearing first? Is it an even wear? Is it feathering on the tread blocks?

For daily driving I wouldnt recommend more than 36 just to try limit fuel consumption.

Tyre press is a comprimise betwee grip and tyre wear. Do you want you rubber to last? or do you want it to grip?

Link to comment
https://www.sau.com.au/forums/topic/318811-max-psi/#findComment-5223024
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...