Jump to content
SAU Community

Fitment Of Bee-r Rev Limiter And Apexi Safc-neo

XxNinjaxX

By XxNinjaxX,
in Western Australia

 Share

Recommended Posts

Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted (edited)

Got my SAFC 2 installed & tunned by all star garage. All good.

EDIT: realistically SAFC is just a basic A/F ratio signal bender, any decent import work shop should be able to install & tune with no problem.

Edited by Mayuri Krab
XxNinjaxX Collaborator

XxNinjaxX

Posted
  • Author
Posted
  R32 Driver said:
not sure why you want a bee-r limiter besides scaring people

+1 to All star and Hyper

and everyone else would say check the consolidated workshop

ive had alot of people refer me to all star so i think i'll get the safc neo tuned there, thanks guys!

destroyed the rings? how'd it manage to do that..i didnt buy the limiter to get my skyline to blow flames like about 99.8% of people who have them do, i just want the limiter there as a restraint so i dont rev my car anything over 4000rpm to protect the motor from my p plater right foot -.-" im not saying im a hoon or anything i dont do burnouts or drift all im saying is i cant resist getting her on boost every now and then like im sure most skyline owners do no matter how old they despite the obvious loss in fuel economy :)

BANGN Experienced

BANGN

Posted
Posted (edited)

BS ^^^

Bee*R is good for only one thing.. scaring people! Letting it crack past someone who just cut you off is the best.

There is a factory rev limiter on the car, setting it for 4k will make the car a nightmare to drive in the city.

If you don't have enough self control to drive it accordingly then buy a mazda 121.

Edited by BANGN
NA_Goodness Grand Master

NA_Goodness

Posted
Posted

Go ahead and install it. When it destroys your already fragile oil pump, you'll know what we mean.

Oh yeah, and I was a P-plater with a powerful Skyline. Went the 4 months without passing 3k. Self-restraint really isnt that hard. Otherwise, you've got the wrong car.

ZXY Mentor

ZXY

Posted
Posted
  NA_Goodness said:
Go ahead and install it. When it destroys your already fragile oil pump, you'll know what we mean.

Oh yeah, and I was a P-plater with a powerful Skyline. Went the 4 months without passing 3k. Self-restraint really isnt that hard. Otherwise, you've got the wrong car.

why do people buy high powered skylines and dont pass 3k...why not buy n/a :)

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

I'm an apprentice mechanic... My car is tuned very rich, so even driving it easily it uses a fair bit of fuel.

Plus I managed to lose my licence WITHOUT passing 3k, so not sure how I would have gone if I did have a heavier foot...

I'm buying a slow daily, so not a worry.

alpinestars Experienced

alpinestars

Posted
Posted

even setting it at 4k reving to that you will still make noises once youve hit limit ive played with all the settings on the bee-r suprisingly even at 2k limit you shoot flames and make gunshot noises but yeh

if you want to set limits buy a pfc and you have 2 units in one

syfon Veteran

syfon

Posted
Posted
  DR1FT4 said:
I'm a P plater with no self restraint, still have my license and have travelled 30,000 in my first 6 months of driving

Lol you siad you have no "self-restraint".

That means you are saying you don't restrain yourself from doing anything in your car and that you havn't been caught yet :(

BTW GL with the sale of my old rod :)

Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted
  ZXY said:
why do people buy high powered skylines and dont pass 3k...why not buy n/a :(

I'm too chicken, anything over 50% throttle on this car scares me :)

I have no problem revving the Corolla near red line (6k) everywhere I go as even if I do that with foot nailed down the car will still be going at snail pace... although I hate that horrible engine noise when that little 1.8 N/A is revved near red line, sounds like its dying.

  Gdekwant said:
Lol@not revving past 3 or 4k, how do you guys even get anywhere.

RAC suggests you should accelerate from 0 to 20km/h in 5 seconds or longer :)

ahh 33 s2 Mentor

ahh 33 s2

Posted
Posted

aahahah even at at 4k theres a fair chance if u smash into the limiter ur still putting the oil pump and turbo and pistons in danger, i dont understand how its so hard to drive with a bit of restraint, if u cant u prolly shouldnt have licence, let alone a skyline givving the rest of us a bad name,

skyline arent that powerful and fully hectic that u need to restrain it to drive safley,

FAIL

ZXY Mentor

ZXY

Posted
Posted
  R34P3R said:
rhys please explain how the bee*r damages the engine. i was thinking of getting it to scare the spiders that live in my exhaust and not old people :(

he mentioned something about it destroying the owners exisitng fragile fuel pump?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...