Jump to content
SAU Community

Recommended Posts

Hi guys,

Would you reccomened me importing an mr2 turbo from japan? or would it be cheaper to buy one? I've been reading that it's hard to get a car landed for less 10k and most MR2's seem to be around 8-13k.

I have seen MR2's in japan around 2k.

Link to comment
Share on other sites

Hi guys,

Would you reccomened me importing an mr2 turbo from japan? or would it be cheaper to buy one? I've been reading that it's hard to get a car landed for less 10k and most MR2's seem to be around 8-13k.

I have seen MR2's in japan around 2k.

The MR-2 turbo (SW20 model) is not allowed for import to Australia with the current laws. The only MR-2 you can import is the earlier AW11 model built in 1988 or earlier, so if you wanted an SW20 turbo then you will have to buy one locally unfortunately.

Link to comment
Share on other sites

  • 4 weeks later...
The MR-2 turbo (SW20 model) is not allowed for import to Australia with the current laws. The only MR-2 you can import is the earlier AW11 model built in 1988 or earlier, so if you wanted an SW20 turbo then you will have to buy one locally unfortunately.

Serious?? O.O

i was going to import a mr2 gts from Japan...

oh man, all the gts and even the older gt version are so expensive in Australia.

And i thought we can import them because Australia didn't produce any mr2 >.<

if it's ban from importing, what is the reason? emission?

Link to comment
Share on other sites

The import laws are fairly simple for this sort of car ... they are not allowed for import under the SEVS laws because the SW20 model MR-2 was sold in Australia in full volume (different engine makes no difference), so the only other way it could be imported under would be the pre-1989 laws however the SW20 was not built as early as 1988 so that is out too!

Link to comment
Share on other sites

  • 2 weeks later...

no you couldn't. :blink: doesn't matter if it's from canada or west africa for that matter. same rules apply. even if it did make a difference (which is doesn't) LHD would just make it even more of a hassle.

they are not exactly a big dollar car over here. there is a big range in price but a early 90s turbo model is $10K and up and a non-turbo under $10K no problem.

Link to comment
Share on other sites

I imported an SW20 mr2 in feb 2006. It would have been one of the last ones to come into the country. It was done under the old 15 year rule, after it was abolished, thanks to a bloke who had stocked up on a heap of vehicles knowing that the rules were soon to change.

Anyhow, despite a good report from the agent, it turned out to be pretty rough.

Even if importing was still an option for these cars, i wouldnt recommend it. The costs are likely to be about the same as buying locally.

They are an old car now. The ability to test drive one, and have it properly checked out, is godsend.

Link to comment
Share on other sites

I imported an SW20 mr2 in feb 2006. It would have been one of the last ones to come into the country. It was done under the old 15 year rule, after it was abolished, thanks to a bloke who had stocked up on a heap of vehicles knowing that the rules were soon to change.

Anyhow, despite a good report from the agent, it turned out to be pretty rough.

Even if importing was still an option for these cars, i wouldnt recommend it. The costs are likely to be about the same as buying locally.

They are an old car now. The ability to test drive one, and have it properly checked out, is godsend.

sound advice backed with actual real world first hand experience. :D what more can you ask for?

anyway, as above importing is no longer an option so in this case the choice is made for you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...