Jump to content
SAU Community

Injectors

66yostagea
 Share

Recommended Posts

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
I just rang a place down the coast and they want $220.00 to clean if I take the rail in??????????????

Any one have another idea for a professional clean??

Have a look on the internet. I just had some flow tested and while looking around I found prices vary from $25 to $50 per injector for clening and flow testing. (or you could just buy some new 550s)!
Link to comment
https://www.sau.com.au/forums/topic/319093-injectors/#findComment-5214052
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

New Deka's are around the $400-$500 mark a set. There was some negative comments about them a while back but mine are running strong on E85.

On car cleaning is not going to work, they need to be placed in an ultrasonic bath. Is there a problem with them? If not, I wouldn't bother. Save up for some new ones mate.

Link to comment
https://www.sau.com.au/forums/topic/319093-injectors/#findComment-5214097
Share on other sites
darrinspencer Grand Master

darrinspencer

Posted
Posted
New Deka's are around the $400-$500 mark a set. There was some negative comments about them a while back but mine are running strong on E85.

On car cleaning is not going to work, they need to be placed in an ultrasonic bath. Is there a problem with them? If not, I wouldn't bother. Save up for some new ones mate.

I have a new set of Seimens deka coming this week 650cc

Hugh, it is well worth getting them done. Side feed injectors like you have can be a bit harder to do due to mounting them in the machine apparently. I had a mobile guy do my R33 4 years ago for $150 with them already out of the car.

They should replace the o rings hence the cost of getting them done.

My R33 had 2 out of the 6 injectors 10% down in flow prior to being cleaned. So when people say the factory 370cc injectors can handle "X" power they are assuming all 6 injectors are flowing the same. If 1 or 2 injectors are down 10% that is enough to run to lean on those cylinders. Goodby engine.

Don't buy new bigger injectors unless you have a new ECU to be able to run them.

Link to comment
https://www.sau.com.au/forums/topic/319093-injectors/#findComment-5217701
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • Predator1
      Billet Merge Collector for manifold

      By Predator1 · Posted

      As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...