Rb20det In R31 Sillo

[r32gtst sedan]

Hey how you doin. Im looking at putting a rb20 in my r31 as the name of the topic might suggest. So if there are other posts on the forum can you post links in here otherwise post up your experience with this conversion.(i.e like how long it took, how hard it is that sort of shit)

Thanks

[R31Nismoid]

www.r31skylineclub.com

Go there mate, all the info you need on the tech area.

[r32gtst sedan]

cool thanks for that

[ethan]

its relativly easy as far as i know u use all the same mounts, starter motor, alternator...ect, all you need to replace is the motor, box. tailshaft and alter the crossmember. and the wiring loom needs a 5k resistor on it to make the tacho work properly cause the rb 30 has one coil with dizzy and 20 has coilpack on each plug.

[Mandingo]

Its been a wjhile but i think you use R31 powersteering bracket. bolt straight on.

Make sure you get a mini spool for big fun. The R31club boys should help you out with that.

also get some good swaybars. laters

[JonnoHR31]

nothing to do with the coils. stock 31 has the needed resistor(s) built into the ecu before the tacho output. later nissans have it built into the cluster and probably need a different amount. so if you put a later ecu into a 31 you dont have one at all and/or its the wrong amount, hence the need for an external one

[r32gtst sedan]

yeah alrite thabnks for your help but now the only problem is cash since i got non lol