Jump to content
SAU Community

Recommended Posts

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

Link to comment
https://www.sau.com.au/forums/topic/319256-trying-to-get-my-car-on-the-road/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

first of all wow and congrats

give other workshops around adelaide a call.....boost wor, graham west, willall, smooth garage

Classic Performance will sort you out.

Ashley has also built plenty of bullett-proof RB25's.

And I take my GTR there and swear by them.

Wouldn't touch the other few ones. Heard too much bad shit about that bunch.

Edited by CRoNic...
Classic Performance will sort you out.

Ashley has also built plenty of bullett-proof RB25's.

And I take my GTR there and swear by them.

Wouldn't touch the other few ones. Heard too much bad shit about that bunch.

I wouldn't listen to any 'second hand' information from people in Adelaide. Too many people with no idea and just like to gossip like little bitches. I know a few personal experiences or direct experiences of some workshops where talk might be true, but I also know of a lot of stories that are also unfounded and based on car owners with no idea, or unreasonable expectations.

To be honest I've never heard of Classic Performance but Ashley seems to get a good wrap :) After many years in the scene you get to know your own crowd and become loyal to people. Sounds like you're on a winner though.

Kahli, have a chat to Nicko or Ben from Smooth Garage. Not sure how busy they are now, but they may be keen to have it finished up for you :thumbsup:

I wouldn't listen to any 'second hand' information from people in Adelaide. Too many people with no idea and just like to gossip like little bitches. I know a few personal experiences or direct experiences of some workshops where talk might be true, but I also know of a lot of stories that are also unfounded and based on car owners with no idea, or unreasonable expectations.

To be honest I've never heard of Classic Performance but Ashley seems to get a good wrap :D After many years in the scene you get to know your own crowd and become loyal to people. Sounds like you're on a winner though.

Kahli, have a chat to Nicko or Ben from Smooth Garage. Not sure how busy they are now, but they may be keen to have it finished up for you :)

And i recommend not.

Willall.

If you trusted them to start work on your car, let them finish the work.

If you take it anywhere else you are going to get absolutely raped price-wise, as it is not their project.

I'd hit up smooth garage and willall

I've had niko and benny work on my cars and have nothing bad to say about them and they are quite helpfull. I own nikos old s13 and turned it into my drifter and it loves the thrashing it gets and it built very well by smooth.

I've also owned martin donnans old 33 4 door with a forged 26 init. The build quality was great and was set up really well. Someone deffenetly knew what they where doing there.

Ive used a few of the other import workshops and haven't been as happy as I am with the ones above. But for reffence I haven't used classics before but my mate did and another ones does and they are also quite happy with the results.

Hey guys cheers for the come backs.. and also support (:

Im running a Rwd Rb26 gearbox which i got custom done... as I stated its all rb26 running gear lol

Yeah i used to go to smooth garage ..nice blokes but ive had a bad experience years ago.. Might have to give them another chance (:

I spoke to Ashley and he seemed like he knew what he was saying.. and sounded pretty confident.

Cheers for the help!!!

Firstly I have a R32 GTST with a Rwd Rb26 conversion.. The loom and full running gear is Rb26 so nothing is Rb20 in the car at all!

So the engine is in, Gearbox just got put in but they didnt plug up the gearbox so I gotta take it back and the custom tailshaft is being made this week.

Not everything is plugged up etc looms..but everything is in place. Dash lights work and clock but nothing else on the dash. Starter motor, Speedo drive etc still need to be plugged up. Some bolts are missing underneath the car..like steering column.. so pretty much the whole car needs to have a good look through.

Anyways once I get the tailshaft and I have gotton the gearbox all plugged up im thinking about taking the car to Classic Performance? Ive heard Ashley knows what he is doing.. etc he has a Rb26 in a commondore ute and only charges $88 an hour...

Anyone know where I should go and who to see... Ive called up More Power and they didnt seem to keen to touch the car. I just wanna take the car somewhere where they can finish it off and I can come pick it up and drive it home.

Any Suggestions in what I should do?

I would do a lot myself but I am 3 months Pregnant so no hope for me in touching the car...

and your how old again?

and your how old again?

And that is relevant to who will fix her car, how?

Kahli, there's lots of good suggestions here, best of all; talk to the people. It's all well and good everyone telling you where to go, but if you go to a place recommended and you just don't get on with them, it doesn't really make for a pleasant experience

and your how old again?

I fail to see how this is any of your business reguardless?

Are you suggesting not old enough?... Who are you to judge on 'old enough' or even to judge at all?

ive known a few guys who have had plenty of work done by both boostworx and wilall, and have recommended them strongly.

i havent used either myself, but i was always planning on getting wilall to tune my 200.

and your how old again?
i was merely asking a question

ffs guys get over it.

i wasnt getting at anything.

but im not interested in playing these stupid little games so i wont be replying again on this matter

i know its already been covered, but keep your f**kin opinions to yourself eh? no matter what you say after the fact, that was an obvious bait. the last thing she needs is people (like you) getting up on a high horse and throwing down shit like that. next time you feel the need to say something like that, buy a supercharger instead.

best of luck with the pregnancy and the car kahli. :rofl:

Edited by scandyflick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...