Jump to content
SAU Community

Bc Racing Coilovers?


Recommended Posts

Running the mid-range set in my 32 now, i enjoy alot of mountain driving, got them set pretty stiff and when on a nice smooth mountain road car just sits where ever you steer it (Federal 595RSR's, 430hp atm).

around town and over bumps im finding them a bit stiff, however i have solid rear mounts and i could probably soften the settings a bit :P.

running the standard f8kg r6kg. paid for them at lunch time and had them delivered from out of state the next morning.

Highly recommend if your wanted a more "sport/track" feel over the normal daily.

Link to comment
Share on other sites

how do these stack up with bouncy roads and train track crossings?

i've had a pair of leaking JIC and Tein in the rear which would bounce abit once hitting those surfaces..... not due to the hard springs, ppl with leaking coilovers will understand.

hard spring rates aint a problem but seeing as i've never used a set that was in good condition i'd rather ask the question

My WRX daily driver has done 3 snow trips this year with plenty of questionable road surfaces and handled like an absolute dream on BC BR's which are the recommended spec for a street driven car.

I am a self confessed Japanese brand whore but the BC's have earned my tick of approval.

Link to comment
Share on other sites

i am running a set of V1's atm that are very good but i had the BR's in my old R33 that has just been writen off ;) and i was so happy with them did a drift event and they performed out of my expectation street they are great and less bouncy than the lowered springs i had in it before, however please get a quality wheel alightment after installation.

:P i am now buying a set for my mum's WRX as her soft coilovers are harsher than my car and she prefers to drive mine atm :P

Link to comment
Share on other sites

BC's are value for money, comfortable ride, great construct and tuning options.

I would definitely purchase another set without hesitating!

Add decent sway bars F/R and they perform well in the corners, the only fault I can think of is steep driveways may leave you with one wheel off the ground.

Link to comment
Share on other sites

BC's are value for money, comfortable ride, great construct and tuning options.

I would definitely purchase another set without hesitating!

Add decent sway bars F/R and they perform well in the corners, the only fault I can think of is steep driveways may leave you with one wheel off the ground.

LOL YES!!! that is true! i go in and out of certain driveways and end up only having one wheel on the ground lol

Link to comment
Share on other sites

LOL YES!!! that is true! i go in and out of certain driveways and end up only having one wheel on the ground lol

LOL same here. Whenever I drive into maccas's drive thru, one wheel off the ground and I see the WTF look on everyone's face.

Link to comment
Share on other sites

No problem, I hit triple tracks at 80 every day on the way to work. Tyres stick like glue. Great shocks in these, still perfect after a year of daily thrashing, haven't needed to adjust them yet either.

thank, thats what i wanted to know, seems like i'll be getting BC's in the near future :P

Link to comment
Share on other sites

The only fault I can think of is steep driveways may leave you with one wheel off the ground.

That's the case with any stiff coilover :)

My soft Bridgestone coils still lift wheels.

Link to comment
Share on other sites

i have had Tien's Ohlins and HKS coilovers and i have BC on my 200 and very comfortable like alot of people good bang for buck and there is alot of support about them considering JUst jap sells em

Link to comment
Share on other sites

  • 6 months later...

Sorry to dig up a resting thread, but i am glad i came across it. Pretty much convinced now to go buy a set of BR type coilovers.

Everyone's BC's still holding up ok?

Been running BC BR's in my Stagea for 1 1/2 years absolutely no issues, over 30 000km now. Perfect.

You won't go wrong.:thumbsup:

Link to comment
Share on other sites

  • 3 weeks later...

yeah mate still going strong great coil overs the reason they lift one wheel is because they dont have helper springs to allow them to drop down doesnt worry me one bit tho

Link to comment
Share on other sites

I've got BCs in my R33. Really Really happy with them :)

<div><br></div><div>Edit: I too have to problem with wheels coming off the ground, esp now with new swaybars. Makes it really hard to get up my driveway.</div>

Edited by zoidbergmerc
Link to comment
Share on other sites

yeah mate still going strong great coil overs the reason they lift one wheel is because they dont have helper springs to allow them to drop down doesnt worry me one bit tho

What?

Since when do you need helper springs to get the shock into full droop? They have gas pressure in them for a reason.

If the shocks lack travel that is another issue entirely.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Big claims here.  Any links up on the website ?   
    • If your HP goal is reasonable and you are not drifting. Buy a new R34 box.  If the above is not true, buy a wrecked R33 box and put a gearset in it.  CD09 are not as strong as you think and the cost of / mess around of the conversion puts you in gearset territory.    Also the deal above is awesome,, get that  
    • Just got back from a little hands-on with a G58 Baron....I was thinking about this... ..best I can figure it, that pinny was tail-ended ...I didn't really think about the wiring, because all that mattered was the tank and pump cradle (I think I mentioned the pump itself I couldn't vouch for)...which didn't matter, as you said you'd be replacing the pump anyway.... ...'for some reason'....and I imagine this is the panel shop's doing... they've replaced the cradle wiring with a metre of 7-core trailer loom, and attached the loom plug (from a different car) to that. The actual cable run from the top of the pump cradle, to fuel pump harness end in boot, is maybe 60cm in length...so I've no idea why they did this... ....the connector in the boot of the pinny, is not going to help you here...because in theory, it should still be present on your car. On top of that, because they've done what they did, we have no idea which colours of the trailer cabling, have been connected to what on the fuel pump cradle (pump +/- , shield, fuel guage/low-level senders)... ...this means, best approach is to remove the pump cradle, and re-work it now ...not later. That is, if you were going to replace the pump, do it, replace the soft lines at the same time...and sort the wiring out (replace that trailer cable with the wiring loom off your old cradle)...
    • Well, maybe not. The main feature of Chinese manufacture seems to be incredibly variable quality, coupled with an apparent willingness to find a way to see even the stuff that fails QC. So the military could still take the cream of the production run and somehow sell the "sellable but not really useable" stuff to the stupid round eyes on the other side of the world.
    • Have you adjusted the clutch pedal rod? You can wind it in to shorten it. Just can be a cnut to get to.
×
×
  • Create New...