Jump to content
SAU Community

R33 Gearbox Into A R32, Tech Savy Please Help


Recommended Posts

hey guys iv search but cant really come up with much for what im after...

just want to know if i bought a r33 gtst manual conversion kit, what parts are interchangeable with the r32.

as in, is the clutch pedal, cross member the same?

i kno the tailshaft and speedo has to be modified but what else....

or a easier way to put it is, what parts can i use from a r33 conversion kit when puttin it in my r32 gtst

Link to comment
Share on other sites

should all bolt straight in withno dramas you might have a lil issue with the gearbox xmember but thats hardly a problem clutch master cylinders in a r33 are shorter but still will bolt into the 32 hen just your speedo drive mod this conversion is a pretty straight forward one

Link to comment
Share on other sites

how bout clutch pedal?

my main concern is wether or not to buy the clutch pedal or the master cylinder....

or if i dont buy those two, will the r32 mastercylinder work with r33 lines and slave.

Link to comment
Share on other sites

yes clutch pedal will bolt in and yes a 32 or 33 mastercylinder will bolt in and do the job you may need to rebend the hardline but that is nothing difficult got to love nissan interchangabilty dont stress so much its not an overly hard job just take your time with it

Link to comment
Share on other sites

cool sounds good.... i got no problem fitting the parts... i just dont wanna waste money buying them all if they wont fit (as i have a change to buy a whole r33 kit)...

thanks guys, if anyone knows anything i should know b4 i go ahead and purchase the r33 stuff... please let me kno.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey lads, going to be removing the front CV's from the stagea (1999, series 2 rs4 auto), as the inner boots are shot on both, and since I'll be replacing the coilovers to a new/ish set of bilsteins, thank you SK, might as well do this too while I'm at it. Ive left this for way too long, atleast a year now, but no sounds yet so I think the joint is still okay. Anyhows, I am looking for a decent shop in Sydney who is decent, and wont charge an arm and a leg for it. Any recommendations? cheers TIA
    • Awesome stuff. I should sell my R32 and get a V37 RedSport haha. Looking forward to this build.
    • So, first things first, it's had a service for all fluids (2x coolant as it has air/water heat exchangers instead of air/air), new air filters (they were terrible, and one was pinched when installed by NIssan's "technician"). Also, both the boot and bonnet gas struts were shot, so ebay sorted some new ones, the jack handle kept me alive for the first service It needs tyres (more to come on that...) and the brakes are horribly grabby, looks like they've been badly glazed sitting around in Sydney traffic. On the bright side there are no obvious leaks and it runs well. The car goes well with 300kw (stock, claimed, I'll put it on a dyno soon), does good skids and handles reasonably well eg in long medium g corners. It is no cruiser like the Fuga though and is noticeably jiggly on the average (poor) rural road and terrible on corrugated dirt.  I'll get some road/race shocks in it shortly which should help.
    • So, for those following along at home, I've had the R32 up on stands for a while since a minor incident in the last rally, which required a new rear quarter panel to be welded in after the car had been (pretty much) put back square again. The problem is of course, that some R32 GTR stuff is simply not available (eg front guards) and other things are either expensive (second hand) or very expensive (nismo heritage).   In the end I've decided to try out a v37 with some track days, hill climbs etc before going ahead with modifying it for race/rally like the old GTR. To do so I've picked up an ADM Infiniti Q50 Red Sport, rather than a JDM car which offers much better value but might lead to complexities when I discuss spec with the production racing guys. In the meantime it will be my daily (well, more like weekly) driver, mostly highway use to Canberra or Sydney. BTW yes, I did notice it is auto-only, and yes I did know the Z comes with the same motor in manual. Big issue with the Z for me is that it is unlikely I can meet the new rally cage clearance requirements in that chassis so I've gone the 4 door/auto route The colour isn't great for rural lyf, and neither is having a sunroof for racing, but the Q50 market is small and it is what it is. Also...can't say I really like the shape much either, the front is OK but from the rear it is a dead ringer for a mazda 6
    • Ahh yes looks like I’m playing with a new cock on the weekends. Thanks for the information @soviet_merlin I’ll search for it later on and try to get it shipped. Looks like it won’t happen this weekend regardless. But the coolant looks fine so far (no floaties of concern). And waiting another week will slow down my money hole 😂
×
×
  • Create New...