Jump to content
SAU Community

Recommendations for custom pipework

Steve

By Steve,
in South Australia

 Share

Recommended Posts

Steve Grand Master

Steve

Posted
Posted

Hi all,

I want to replace my intercooler to plenum pipe, its a bit too thin and I think is causing problems, but either way, it definately wont hurt going to larger pipe, ie 3 inch.

So far I have been to a couple of places and been quoted 450 and 515 dollars, which is a bit more than I would like to spend if possible.

Can anyone recommend a place that does custom pipework, and is reasonably priced (hippy, you must have sused this out by now:D). I feel the quotes I have had so far a bit expensive - may be that I am just suffering from tight arse disease though:p

Cheers

Steve

Link to comment
https://www.sau.com.au/forums/topic/31936-recommendations-for-custom-pipework/
Share on other sites
Steve Grand Master

Steve

Posted
  • Author
Posted

thanks enrico, I am seeing clint tomorrow, I shall check it out.

Bl4cK32 - shall do

PSI-VL, their work is first class, and I have checked them out. You do get what you pay for, but by the same token, most workshops these days charge around $60-$70 per hour - thats more than a doctor:) and really, its just a pipe:p

PSI-VL Rookie

PSI-VL

Posted
Posted
thanks enrico, I am seeing clint tomorrow, I shall check it out.

Bl4cK32 - shall do

PSI-VL, their work is first class, and I have checked them out.  You do get what you pay for, but by the same token, most workshops these days charge around $60-$70 per hour - thats more than a doctor:) and really, its just a pipe:p

Spot on there, STEVE.

$60-$70 per hr is steep i know, wish i was on that per hr!!

What area you from STEVE?

I'll get the name off a mate, who knows a guy out my way that does all fabrication work.Does excellent work and charges $30 per hour.He owns a yellow/gold TE or TG Gemini with a 350 in it, you might of seen it cruisin anzac a few times?

If interested, let me know.

Steve Grand Master

Steve

Posted
  • Author
Posted

Nightcrawler, thanks, they are similar priced - and I am in tightarse mode since it is redoing something that has already been done. Evan (PSI Fabrication) said a while back he could redo the pipework for me for around $150-200 (as I have spend $$$$ with him) - but he has fallen off the face of the planet!

PSI-VL, I live near tilbrooks(hampstead gardens), about 10 minute walk Yes please to your mates, mates name:) that would be great. 350 in a TE/TG? holy fark! Does that live queenstown way? Think I saw a TG down that way with a candy yellow paint job, looked very nice (for a gemi:p)

PSI-VL Rookie

PSI-VL

Posted
Posted
Nightcrawler, thanks, they are similar priced - and I am in tightarse mode since it is redoing something that has already been done.  Evan (PSI Fabrication) said a while back he could redo the pipework for me for around $150-200 (as I have spend $$$$ with him) - but he has fallen off the face of the planet!

PSI-VL, I live near tilbrooks(hampstead gardens), about 10 minute walk  Yes please to your mates, mates name:) that would be great.  350 in a TE/TG? holy fark!  Does that live queenstown way? Think I saw a TG down that way with a candy yellow paint job, looked very nice (for a gemi:p)

Yep, he's in Queenstown.Yep,a 350 in a gemi goes very well, mid to high 10's from memory!!

Chasing the number for you, will post asap.Will post it up here by lunch time

(fri -16th).Had trouble getting thru to his mobile today.

You'll be impressed with the work he does.At half the price of anywhere else.

Talk soon,

PSI-VL

jager Community Regular

jager

Posted
Posted

still looking for psi fabrications, i work in edwardstown, his

still around here been looking for him ask turbo tune they know exactly where

his moved to last i heard he was behind the firestation over daws rd

but i couldn't find when i was flexing in the back streets

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      *that* is a question for chatgpt (or someone that understands maths....but I'd try chatty). Drop them the table and ask for the formula
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Alright. Exhaust has been looked at, and booked in 'soon'. I'm not 100% convinced it's going to be as good as possible but I'm going to go with it anyway. If I get a reasonable thing that works for 10 years I mean that's twice as long as I've lived with the current one. I have a more pressing issue. I have fixed my MPVI3 (by buying a new one). Excellently, one can wire in analog 0-5v inputs to the ECU itself. I had wideband already via Serial so I also wired it in via the direct input. The idea being I can use the standalone logging without a laptop and have Wideband data in it. The other wire I thought I'd use oil temp. This is where I've gone crazy. HPTuners requires you to implement a formula so you know how much volts = how much temp. This seems relatively simple to me. However I cannot find the scale for this anywhere on the internet, nor decipher how to figure it out without removing the sensor from the car. All I know is that voltage actually goes up as temperature goes down. I am using the actual gauge, so I can see what the temp is. The signal wire has been branched off into the MPVI3. EXAMPLE: 2.68v = 58C 2.7 = 57C 2.74v = 56C 2.8V = 54C 3.06V = 49C 3.18V = 47C 3.37V = 43C I think the gauge is 50-150C. It may be more. It may be less, because I can't find it for the love of f**k. It appears all the information about the gauges I have has been scoured from the internet, but the sender is VDO 320.021 I believe the resistance chart is this How the f**k do I convert this to a voltage? Once I have a voltage... I then have to perform this transform of said voltage to show it in the scanner: https://www.hptuners.com/help/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm @GTSBoy you're probably my only hope here TEST YOUR MIGHT
    • Sleepergm
      Nismo rear spats

      By Sleepergm · Posted

      Here’s the updated and installed muse replica nismo ones … very happy with the outcome. Eventhough I painted my whole rear end due to my rich idle lol. 
    • GTSBoy
      PAT / Premier Auto Trade parts?

      By GTSBoy · Posted

      Hmm. I had a good look (w/o searching, because I'm not logging in) and couldn't see it either. I distinctly recall the thread, not many weeks ago. It must have been removed or perhaps put into the back section. If it was in Off Topic you should at least have been able to search it up. So if I'm not hallucinating, it is fairly decently removed.
    • R32withaLS
      R32 GTR wont start, no dash lights, no power to fuel pump

      By R32withaLS · Posted

      Any updates I got same drama?
×
×
  • Create New...