Jump to content
SAU Community

Rare Import and Parts

GTR R35

By GTR R35,
in General Automotive Discussion

 Share

Recommended Posts

GTR R35 Proficient

GTR R35

Posted
Posted

I am abouts to buy a Stagea 260RS and I am just a bit concerned with the availability of parts for this car. I know the drivetrain will not be a problem as it is just a GTR under the bonnet, but I was wondering about panels and bits that are not drive train related. Is the gray import market setup in such a way that anything is reasonably available ?

If I have a accident, I do not want to be waiting 10 weeks for a guard, bonnet etc, but I guess it should be the insurance companies problem not mine.

I do not want something so rare that I cannot get anything for it in this country.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/31937-rare-import-and-parts/
Share on other sites
predator Grand Master

predator

Posted
Posted

I doubt it would be easy. Its all about what you see in the streets. If you don't see it driving around the streets, you're going to be in trouble when it comes to parts. Even 32's and 34's are a bit more difficult than common as mud 33's.

If I have a accident, I do not want to be waiting 10 weeks for a guard, bonnet etc, but I guess it should be the insurance companies problem not mine.

true, but you're the one going to be waiting for 10 weeks without a car, not them!

MJ Mentor

MJ

Posted
Posted

it is a hard choice isnt it. I've always liked uncommon imports for their unique value. I doubt id own one though as said parts would be too much of a problem. When i've been to any import wrecker just from looking through the warehouse i mainly only ever see s13/r32/33/34 and soarer parts and a few other bits and pieces

rsx84 Veteran

rsx84

Posted
Posted

took me 4 months of looking to get a set of headlights for my car, once you find a place that can get what you want then you know where to go to next time! there is the japan section here post in there to see what they say as a few members live in jp.

xRHETTx Mentor

xRHETTx

Posted
Posted
I reckon there will be plenty of stageas around in next 12 months....but with any grey import you need patience with parts.

good choice btw

Yeah but not 260RS Stagea's. I doubt many of the panels and parts would be similar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      I think my main complaint with your idea is that there is a veneer of idealism spread across it. You want the simple numbers to make it easier, but all they will do is make it easier for someone to come to the wrong conclusion because the fine details will kick them in the nuts. As it is right now, the tiny bit of arithmetic is NOT the obstacle to understanding what will fit and what will not fit. The reality of trying it is what determines whether it will fit. If you had a "standard rule" that R34 GTT guards have that magic 100mm space from the hub face to whichever side you were worried about, and someone said "excellent, this wheel is only 98mm in that direction, I'll just go spend $4k on them and jam them on my sick ride".....they would just as likely find out that the "standard rule" is not true because the rear subframe is offset to one side by a fairly typical (but variable) 8mm on their car and they only have 92mm on one side and 108 on the other.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      Ah ok interesting to know.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
×
×
  • Create New...