Jump to content
SAU Community

Wrecking R33 Gtst


Recommended Posts

hi everyone, im wrecking an R33 GTST Skyline. Got both s1 and s2 parts avaliable as it had a s1 front end on it. i have heaps of gear still on the car (fuel tank, diff, cradles, upper and lower arms, power steering pump, swaybars etc and panels) (sorry no photos yet) JUST ASK!!!

#1 R33 GTST Series 1 rear spoiler $50 ono

post-35195-12720950059425_thumb.jpg

#2 x2 apexi BOV $60 ono each

post-35195-12720951341738_thumb.jpg

#3 series1 headlights $200ono (pair)

post-35195-12720953135939_thumb.jpg

post-35195-12720953883209_thumb.jpg

#4 Windscreen washer bottle $20

post-35195-12720954906788_thumb.jpg

#5 Radiator Fan $70ono

post-35195-12720956183653_thumb.jpg

#6 unknown brand cannon, $50ono

post-35195-12720957450938_thumb.jpg

#7 set of 17"x7" rims good tyres on 2, other 2 need replacing,

minor gutter rash but overallpretty good, (will not fit over large brake calipers) $600

post-35195-12720959750185_thumb.jpg

#8 drivers door to suit 33 2dr, NO MIRROR, $80 post-35195-12720962536663_thumb.jpg

#9 Tail lights and centre garnish $200ono

post-35195-12720964221582_thumb.jpg

#10 indicator/wiper lever assembly $40ono

post-35195-12720965414384_thumb.jpg

#11 Brake booster $80ono (non abs)

post-35195-12720966749258_thumb.jpg

#12 heater/aircon assembly $70ono

post-35195-1272096829464_thumb.jpg

#13 engine bay wiring loom $150

post-35195-12720970147199_thumb.jpg

#14 Digital climate control unit $50

post-35195-12720971156107_thumb.jpg

#15 Dash wiring loom $50

post-35195-12720972039299_thumb.jpg

#16 Accelerator pedal and cable $30ono

post-35195-1272097338225_thumb.jpg

#17 boot and petrol cap cable $15

post-35195-12720974671688_thumb.jpg

#18 seatbelts $50 set

#19 petrol cap cover $10

#20 steering column barrel and key $70

post-35195-12720977125888_thumb.jpg

#21 Lower control Arms $125 each

#22 Front and Rear Hubs (Fronts pair $100 ono) (Rear pair $100 ono)

#23 Boot Lid and s2 Spoiler $150 ono incl gas struts and hinges

and lots of interior parts available, just ask.

all reasonable offers considered, as i need to move this gear.

cheers Ty

located in SA

Edited by sus 32
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey lads, going to be removing the front CV's from the stagea (1999, series 2 rs4 auto), as the inner boots are shot on both, and since I'll be replacing the coilovers to a new/ish set of bilsteins, thank you SK, might as well do this too while I'm at it. Ive left this for way too long, atleast a year now, but no sounds yet so I think the joint is still okay. Anyhows, I am looking for a decent shop in Sydney who is decent, and wont charge an arm and a leg for it. Any recommendations? cheers TIA
    • Awesome stuff. I should sell my R32 and get a V37 RedSport haha. Looking forward to this build.
    • So, first things first, it's had a service for all fluids (2x coolant as it has air/water heat exchangers instead of air/air), new air filters (they were terrible, and one was pinched when installed by NIssan's "technician"). Also, both the boot and bonnet gas struts were shot, so ebay sorted some new ones, the jack handle kept me alive for the first service It needs tyres (more to come on that...) and the brakes are horribly grabby, looks like they've been badly glazed sitting around in Sydney traffic. On the bright side there are no obvious leaks and it runs well. The car goes well with 300kw (stock, claimed, I'll put it on a dyno soon), does good skids and handles reasonably well eg in long medium g corners. It is no cruiser like the Fuga though and is noticeably jiggly on the average (poor) rural road and terrible on corrugated dirt.  I'll get some road/race shocks in it shortly which should help.
    • So, for those following along at home, I've had the R32 up on stands for a while since a minor incident in the last rally, which required a new rear quarter panel to be welded in after the car had been (pretty much) put back square again. The problem is of course, that some R32 GTR stuff is simply not available (eg front guards) and other things are either expensive (second hand) or very expensive (nismo heritage).   In the end I've decided to try out a v37 with some track days, hill climbs etc before going ahead with modifying it for race/rally like the old GTR. To do so I've picked up an ADM Infiniti Q50 Red Sport, rather than a JDM car which offers much better value but might lead to complexities when I discuss spec with the production racing guys. In the meantime it will be my daily (well, more like weekly) driver, mostly highway use to Canberra or Sydney. BTW yes, I did notice it is auto-only, and yes I did know the Z comes with the same motor in manual. Big issue with the Z for me is that it is unlikely I can meet the new rally cage clearance requirements in that chassis so I've gone the 4 door/auto route The colour isn't great for rural lyf, and neither is having a sunroof for racing, but the Q50 market is small and it is what it is. Also...can't say I really like the shape much either, the front is OK but from the rear it is a dead ringer for a mazda 6
    • Ahh yes looks like I’m playing with a new cock on the weekends. Thanks for the information @soviet_merlin I’ll search for it later on and try to get it shipped. Looks like it won’t happen this weekend regardless. But the coolant looks fine so far (no floaties of concern). And waiting another week will slow down my money hole 😂
×
×
  • Create New...