Jump to content
SAU Community

R34 Gt-t Mod Dilema...

Adriantc
 Share

Recommended Posts

Harey Veteran

Harey

Posted
Posted
cool thnx. I went to dr drift sometime last year and he said $900 to do it.

But il go pass again and ask him.. (busy man)

If u dont mind me asking, How much power did u get with the set up that i got now?

thnx harey :P

I have the same as you except I still have the stock dump pipe. I made 190rwkw with the boost dropping down to ~9psi at redline. Car feels very strong, especially the mid range. Overall I am very happy, I have even decided not to go the next step of bigger turbo etc because it feels great on the road. I am not really into 1/4 mile racing etc, just want a quick streeter. Car is super smooth.

You should make very close to 200rwkw.

tavstar34 Community Regular

tavstar34

Posted
Posted
I have the same as you except I still have the stock dump pipe. I made 190rwkw with the boost dropping down to ~9psi at redline. Car feels very strong, especially the mid range. Overall I am very happy, I have even decided not to go the next step of bigger turbo etc because it feels great on the road. I am not really into 1/4 mile racing etc, just want a quick streeter. Car is super smooth.

You should make very close to 200rwkw.

cool.. 200rwkw with 10psi right?

im going for 12psi. close to 220rwkw?

thats when the fuel pump comes in yea?

tavstar34 Community Regular

tavstar34

Posted
Posted (edited)
Whats your budget? and are you planning on something big in the future?

well if your asking me, My budget is about 6-7k. im looking for 250+rwkw streeter and il be happy. If its gonna cost me that much, I was gonna upgrade it to a GTR.

Point me out to the right direction if u can plz.. good to see u made 300rwkw on yours.

thnx

Edited by tavstar34
Jap_Muscle Mentor

Jap_Muscle

Posted
Posted

proven 250+rwkw setup. please keep in mind the price ranges go from basic just jap shit to high end japanese brands

minimum 3" turbo back exhaust ($1500 - $2500)

040 bosch fuel pump ($300)

FMIC ( $300 - $2000

Power FC (or alt REPLACEMENT ECU not piggy back) ($1500 - $2000)

highflow oem turbo (but personally id go with a gt28 turbo) ($800 - $1500 )

personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400. the key is to use good parts to give you room to upgrade on later on rather then replacing it all together like shitty piggy back ecus.

my 2c

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

Highflow is not really a bad idea if you want to (try) to avoid being raped by the EPA. Same also applies to ECU's. That said if you aren't in vic, or your car is track only then get whatever you want :P

Or you could get a GTR. Most would say that the best money spent on upgrading a GTT or GTST is by selling it and buying a GTR :P

Harey Veteran

Harey

Posted
Posted
proven 250+rwkw setup. please keep in mind the price ranges go from basic just jap shit to high end japanese brands

minimum 3" turbo back exhaust ($1500 - $2500)

040 bosch fuel pump ($300)

FMIC ( $300 - $2000

Power FC (or alt REPLACEMENT ECU not piggy back) ($1500 - $2000)

highflow oem turbo (but personally id go with a gt28 turbo) ($800 - $1500 )

personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400. the key is to use good parts to give you room to upgrade on later on rather then replacing it all together like shitty piggy back ecus.

my 2c

Also:

Injectors 500cc+

Z32 AFM

Upgraded Clutch

I would be surprised if you had it all up and tuned for 6-7k unless you can do a lot of work yourself.

wolverine Grand Master

wolverine

Posted
Posted
personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400.

Hi-flowed turbos with OP6 housings are proven +250rwkw turbos.

Off the top of my head I don't know too many GT28 based turbos with a T3 turbine housing unless they are mated to Nissan housings. The HKS GT-RS is one, (the HKS 2835 ProS doesn't count as it is a GT30 based turbo).

The statement about flowing almost 2x as much is completely incorrect.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • PLYNX
      BCNR33/ECR33 Door corner piece replacement

      By PLYNX · Posted

      Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • BourneToLive
      R32 GTR Park lights issue

      By BourneToLive · Posted

      So was there a solution to this problem? I’m having this issue now. 
    • Duncan
      Beers and skylines Fatz style

      By Duncan · Posted

      not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • Duncan
      BCNR33/ECR33 Door corner piece replacement

      By Duncan · Posted

      I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...