Jump to content
SAU Community

Exedy 5 Puck Button

Granthem
 Share

Recommended Posts

Granthem Mentor

Granthem

Posted
Posted (edited)

Took delivery of my Exedy Heavy Heavy Duty Button clutch today. Hopefully the thing will allow me lots of fun with zero slip.

Anyhow I noticed the pucks are quite thin on their 'meat'. Not alot of room for wear (especially considering the rivets will start hitting well before the whole button is worn down)

I was wondering whether other brands of button clutches have thicker pucks.

Anyway, I took some picks to show how thin the material is, for those who might be interested.

I used the match stick as a reference, it was spare of the moment ok :cool:

1273329146.jpg

1273295267.jpg

1273301147.jpg

Edited by Granthem
Link to comment
https://www.sau.com.au/forums/topic/319734-exedy-5-puck-button/
Share on other sites
wlspn Proficient

wlspn

Posted
Posted

Had one of these in my car a while ago & although the friction material is very thin, it holds up ok.

Lasted 2 or 3 years in my car, thrashing the date out of it & only failed in the end because the pivot broke, the clutch fork moved & I tried to drive with no clutch... Very easy to drive with too. Overall nice clutch I think.

Due to the fact that you shouldn't slip it taking off (you'll get used to it...) it shouldn't wear a lot which I suppose is how you get away with such a thin lining. Haven't seen any other similar clutches to compare thickness

Granthem Mentor

Granthem

Posted
  • Author
Posted
Had one of these in my car a while ago & although the friction material is very thin, it holds up ok.

Lasted 2 or 3 years in my car, thrashing the date out of it & only failed in the end because the pivot broke, the clutch fork moved & I tried to drive with no clutch... Very easy to drive with too. Overall nice clutch I think.

Due to the fact that you shouldn't slip it taking off (you'll get used to it...) it shouldn't wear a lot which I suppose is how you get away with such a thin lining. Haven't seen any other similar clutches to compare thickness

Yeht thats what I expected. The way its meant to be used I guess there isnt much meat needed. I was suprised tho, I expected a little more beef on the pucks. I was just wondering if any of the Xtreme clutches for example have more meat on the pucks.

I also bought a Nismo Pivot too... so that mine doesnt snap like yours, fingers crossed!

HEKT1K Grand Master

HEKT1K

Posted
Posted

Grant is your part number nsk-7056HHDB? i have just had one of these installed last week.. and sorry to hijack your thread, but how the hell do you drive these things?!

are these button types definitely the ones you aren't meant to slip/ride? perhaps i should have gone cushioned button :)

Granthem Mentor

Granthem

Posted
  • Author
Posted

Hey Ric,

Yeh thats the model! My old rooted clutch you see above was a cushioned button. It served its purpose well, I think 5 years of driving it took before it wore down like that. The killer for it was limiter launching at the drags on semi slicks.

As for the new button, you will get used to it! My mate has a twin plate nismo clutch and he can use it like a normal clutch, you wouldnt even know. Give it a few weeks, you will adapt to the severity of it.

Definitely dont slip or ride it. Basically learn the revs that it seems to engage with best, and you should be fine. You just cant get lazy with them... because they will snap your neck off if you stuff it up lol!

How much power does your car have? If it is a near standard 33 gtst, the cushioned button would have probably been a better option :)

HEKT1K Grand Master

HEKT1K

Posted
Posted

yeah i'm hoping i get used to it.. the heavy pedal (my old one was feather light) already feels normal

car will soon be around 250rwkw, i'm planning to take it to the drags a bit so i think i've made the right choice as far as thrashability is concerned

bubba Grand Master

bubba

Posted
Posted

Definitely get the Nismo pivot, I've snapped a pivot but it wasn't as bad as the guy above, I was able to drive my car to the workshop by rev matching (it snapped at like 3am cruising home after some heavy abuse on a cruise) and didn't f**k the clutch or slave cylinder.

Interloper Veteran

Interloper

Posted
Posted
Well I got mine back yesterday. Its got some bite!

However, I dont think its too bad. I find blip to 2500-3000rpm and quick drop seems to get it off the line ok.

are you using the stock flywheel and did you need to get it machined or anything to clean it up?

I'm about to make a decision between the exedy HD Button like you have and a Exedy Racing Clutch Stage 1 sports ceramic, which is only $270 more....

http://www.kudosmotorsports.com/catalog/ex...23334-p-82.html

Granthem Mentor

Granthem

Posted
  • Author
Posted
are you using the stock flywheel and did you need to get it machined or anything to clean it up?

I'm about to make a decision between the exedy HD Button like you have and a Exedy Racing Clutch Stage 1 sports ceramic, which is only $270 more....

http://www.kudosmotorsports.com/catalog/ex...23334-p-82.html

Im using a cusco chrome moly flywheel. It needed to be machined yes.

it's growing on me.. but i'm just a bit worried i'm riding it too much, even though i always make a conscious effort to get off it asap. is minimal slip ok or do i need to rev it up and dump every single time?

Yeh I know what you mean. Mine engages so quickly I dont think there is any chance of riding it really. It goes from nothing to grip in .0001 of a second. At the moment, im trying to get a hint of wheel spin off the line, therefore I know its engaging quickly. My tires dont "chirp", its more just small scrape of the rear wheels and Im off. '

Thats how I am making sure its not being 'ridden' on take off.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Should have gone for the 3 Puk Sports Ceramic for a tad more, there's more friction material and no rivots to worry aboyut.

I ended up getting the Sports Ceramic for a GTS-t using a R32 GT-R Push type pressure plate (rated at 1.1 tonnes).. and upgraded to a Nismo Big Bore Slave...

Car drives pretty easy

Granthem Mentor

Granthem

Posted
  • Author
Posted

Just a small update... the clutch is well and truely worn in now. A few hard launches, hard changes etc.

I dont know if im getting used to it, or whether its just bedded in now, but its very easy to drive with. In fact, it hardly seems like a button at all.

Here's to hopeing its just me getting used to it... and not already losing its bite!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...