Jump to content
SAU Community

Recommended Posts

G'day all..

New to skylines, long story short-- I picked up a gtst 4-door R32 for a bloody bargain.

Problem #1-

After warm up & little drive, the Revs will vary between 1200-2100, and it is constant changing. Within 2 secs it changes, like im tapping the accelerater peddal. I've look around and cant seem to find a problem like this on the forum.

It is an Auto RB20det, annoying, if i pull up (& take it out of Park) the thing sits there like im whacking the peddal, makes everyone look--- like im some kinda hoon :cool: Please help.

Problem #2 (and possible connected to #1 problem)-

The car accelerates fine, great in a way, but sometimes it feels like it boost spikes. About 5000rpm or along the way up to 5000rpm, the car jumps, coughs,splutters ect..

I was thinking boost spikes.

The car is pretty well stock at the moment. so if i floor it it most of the time hesitate and splutter like mad.. possible backfiring.. - please help on this too.

I adjusted the RPM idle screw to try and get it lower, because as driving and approaching a red light, the brake had to be pressed a bit harder.. compared to other autos i drive. You can feel the force on the brakes , as if i still was applying the accellerator a little..

Cheers in advance. (oh, i also replaced the AFM) the problem was a little better, but still playing up... not much diff really.

the lumpy idle is probably being caused by a dirty IAC. do a search on here of how to clean it.

as for the splutter up in the revs, it won't be a boost spike (but getting a boost gauge will tell you for sure), but i'm guessing it is a coil pack or spark plug problem. most likely coil packs though. you could start by replacing the spark plugs as they are cheaper the coils. just get some NGK BCPR6ES plugs from your local car parts place. see if that makes it any better. if it doesn't then invest in a new set of coils

Thanks, the more I think it could be air leak or over boosting somehow.....

However, I bought a set of coil packs.. And plugs bcpr6es. Will fit the stuff tonight.

Also thinking about cleaning a few things while I take them off for the fitnent of coils ect,,,,

I just really hope it fixes the prob. I didn't mention that under no load (neutral) it will rev with no probs

if coils and plugs don't work ,,, what is next ??

Does the car make any boost at all? Hunting (idle up and down) is a classic sign of an air leak.

You could be getting spark blow out, this will happen with crappy plugs/incorrect gap/coils. This happens when the car starts making the higher levels of pressure.

Yeah it boosts... the problem is hardly there when its cold (cold air)

I fixed the idle up / down problem so far... although it idles at 1700'ish when warm. (about to clean AAC valve)

Its just the missfire/boost spike/ splutter thing now..t

(thanks guys big help and support)

Update ---

Fixed 99.9% of all problems.

I replaced the coils, and plugs...

----> LMFAO @ plugs <---- looks like they are original.. !!!

picture001y.jpgpicture002hs.jpg

(ignore dirty/grubby fingernail :lol ) (the web-cam doesnt show proper quality of the metal. Its really chalky-white, like a burnt out cars engine block)

I also cleanded the AAC valve thingo, made a good difference. Not multi-rev level, no splutter/spikes ect..

Only problem i have now is the RPM is about 1200.

I cant seem to get it lower. Quick thoughts ?...

Might come good after i do an ECU reset...

and is there any kinda DIY to set the TPS to the correct position ?.

Edited by Blood

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...