Jump to content
SAU Community

Recommended Posts

All SEVS compliance cars should have new tyres fitted regardless of the DOT markings if you follow the laws exactly to the letter. It's unlikely for any car coming from Japan to have DOT marked tyres so your best to assume that they are not DOT approved and just allow for new tyres in your budget anyway.

Tyres are cheaper in the US but the freight cost would absolutely kill you. Depending on the size wheels your V35 has fitted you should be able to get cheap tyres locally for anything from around $100 to $200 each. Compare that to importing tyres from the US including shipping and you will find that the local tyres are much cheaper.

^^^^ wat he said

but i'd also like to add that if you ARE to import tyres into australia. they must be mounted onto wheels. so don't think "man i'm gonna get a steal on some 80 dollar nangkangs! uh-hyuk"

cos it won't happen

just pay for tyres and include tem in your budget n be miserable and poor like the rest of us. =)

I would be budgetting for new tyres as Craig (J-Spec) said above.

The tyres on the car are yours to keep if you choose to sell them or fit them to another vehicle later on (speak to your compliancer on this one).

$400-$500 balanced and fitted is a small price to pay for peace of mind and we do have some good tyres at a reasonable price in this country.

firstly there is no such thing as 'v35 tyres' mate. even when new there would be a variety of tyre models fitted to different year and spec V35s based on options and wheel choice etc. and given how old V35s are now it's very unlikely any have their original set of tyres still on them and if they did I would strongly suggest replacing them anyway as they would be bloody old and hard and just plain un-safe.

like jspec said you should be replacing them. buy something decent mate. there is nothing worse than a nice car with shit cheap tyres. tyres are about the most important consumable on your car for both safety and performance (enjoyment). open the wallet!

not sure what mr eps is on about though about importing tyres? you can import tyres without wheels. lol, how do you think tyre shops do it? they don't mount every set of tyres onto wheels to send them from japan or wherever. buying some good tyres from tirerack in the US is a viable option but it's only worth it for high end tyres. the savings on cheap tyres will be bugger all. may as well just get those ones here.

not 100% sure on second hand tyres as I've never imported the tyres seperate to rims but I can't see why? they may sometimes require them to be sprayed with poison to kill bugs eggs at the time of importation but I can't think of any rule stating they must be fitted to wheels? in fact I'm sure there isn't. I know of people who've imported stacks of tyres sans wheels. definitely no problem importing tyres on their own new or used. :)

The general rules are that new tyres are ok, especially if they are wrapped up in original packaging and certainly must have not been sitting around outside in dirt - so basically new and clean tyres are no issue.

Used tyres have a much higher quarantine risk that is more obvious with tyres that are not on rims because bugs love to sleep inside unmounted tyres, so for a 'smooth' import process its best to only import used tyres that are on rims, otherwise you should allow for the very likely chance that they will be pulled aside for special inspection, cleaning, fumigation, etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...