Jump to content
SAU Community

Has Anybody Used Siemens Injectors On A Neo Turbo?

Randon_I_Am
 Share

Recommended Posts

wasnt me Collaborator

wasnt me

Posted
Posted (edited)

i used these. went straight in no mods needed other then the injector plug.

these are about 950cc and idle perfect. can get smaller ones is you dont think you need that big.

injectos

Edited by wasnt me
Hanaldo Grand Master

Hanaldo

Posted
Posted
i used these. went straight in no mods needed other then the injector plug.

these are about 950cc and idle perfect. can get smaller ones is you dont think you need that big.

injectos

Those won't fit an R34 unless you get an aftermarket fuel rail to suit the 14mm o-rings

gwilkinson34 Collaborator

gwilkinson34

Posted
Posted

I've just had my standard R34 injectors high flowed to 700cc (approx) by a place here in Adelaide - Japanese Motorsport organised it for me.

Haven't got the car running again yet, but apparently the OEM spray pattern is much better than the big single nozzle aftermarket injectors.

They had problems finding anything that would fit without modifying the fuel rail as well...

darrinspencer Grand Master

darrinspencer

Posted
Posted
but apparently the OEM spray pattern is much better than the big single nozzle aftermarket injectors.

I have a set of 650cc siemens and they are 4 hole

Car getting tuned end of next week

Simon-S14 Grand Master

Simon-S14

Posted
Posted

read my tutorial on them in the tutorial section. they are a very simple install and would cost about 30 bucks in mods to make it fit.

I run the 600cc injectors in my neo with a Nistune running them and they perform faultlessly!

I may be selling mine soon if your interested as im upgrading (plans to run e85)

Hanaldo Grand Master

Hanaldo

Posted
Posted
lol very lucky. must have been why they went straight in

Your profile says you have a 33 GTST. GTST injectors and GTT injectors are different.

When i emailed those guys to ask if they would fit an R34 they told me not without modification to the fuel rail or an aftermarket fuel rail.

wasnt me Collaborator

wasnt me

Posted
Posted (edited)
Your profile says you have a 33 GTST. GTST injectors and GTT injectors are different.

When i emailed those guys to ask if they would fit an R34 they told me not without modification to the fuel rail or an aftermarket fuel rail.

yeah mate i now have a R34. those are the exact injectors that i used. what i found when researching for them was

anything that suits BA-BF XR6T will need the fuel rail to be packed out with a couple of washers which is no big deal.

injectors to suit FG XR6T are are straight drop in with no mods required other then the plug change. As 180or200 said

the standard fuel rail is 14mm. i found ebay sellers dont seem to know much about what they are selling so i wouldnt

trust them anyway.

Edited by wasnt me
Hanaldo Grand Master

Hanaldo

Posted
Posted
yeah mate i now have a R34. those are the exact injectors that i used. what i found when researching for them was

anything that suits BA-BF XR6T will need the fuel rail to be packed out with a couple of washers which is no big deal.

injectors to suit FG XR6T are are straight drop in with no mods required other then the plug change. As 180or200 said

the standard fuel rail is 14mm. i found ebay sellers dont seem to know much about what they are selling so i wouldnt

trust them anyway.

I see, so the only modification needed is because of the height of the injectors?

gwilkinson34 Collaborator

gwilkinson34

Posted
Posted
Bosch EV14 NO fuel rail mods required as 180or200 said.

I guess this isn't general knowledge as yet? My workshop had no idea this was the case a couple weeks ago and I ended up getting my standard injectors high flowed...

wasnt me Collaborator

wasnt me

Posted
Posted (edited)
I guess this isn't general knowledge as yet? My workshop had no idea this was the case a couple weeks ago and I ended up getting my standard injectors high flowed...

your right not everyone would know about these. i have had mine in my car for a couple of months

now. imo these are the best option for upgrading NEO injectors. I think it was about $490 deliverd for

a set of 6. 950cc injectors. you cant go wrong.

Edited by wasnt me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...