Jump to content
SAU Community

Recommended Posts

i got sum 18inch rims with missmached bald tyres on them and ive got 4 practicly new 18inch tyres (all 235) that i wanna put on.

so i popped into a tyre shop on the way home and hey was saying its easy to change tyres on a non low profile wheel with a couple of tyre leavers and a mallet but wen it comes to 18s and so on you have to use their machine, and also to prevent scratching the rim.

i bought the rims 2nd hand and and they've got a fair amount of gutter rash already so im not too fussed about that. he quoted me $50 for 2, so if i can save a 50 ill do it myself or be happy to buy sum1 a 6pack or something instead.

so whos changed tyres themselves :P

Link to comment
https://www.sau.com.au/forums/topic/320389-taking-tyres-off-puttin-new-ones-on/
Share on other sites

indeed! I have fitted a few tyres myself and low profile tyres are a flamin mongrel even on a tyre machine..very tight, You need the machine especially to pull the tyre around under the lip when you put the tyre back on, pretty much have to stretch them on. I have seen 4wd tyres been done without a machine but it is pretty hard work.

Perhaps you could put a nice set of split rims on instead lol

+$50 is a bit rude just to swap them over, is he balancing them as well? Even still.. phwaar!

LOL @ Flamin Mongrel being the replacment word for CUN7

Edited by BANGN

yes it can be done with out the machine as i have done it quite a few times now

i have since bought a tyre machine though so if you want me to change them i can do it for you, but you have to take your old tyres away

im in high wycombe

0410 176 627

indeed! I have fitted a few tyres myself and low profile tyres are a flamin mongrel even on a tyre machine..very tight, You need the machine especially to pull the tyre around under the lip when you put the tyre back on, pretty much have to stretch them on. I have seen 4wd tyres been done without a machine but it is pretty hard work.

Perhaps you could put a nice set of split rims on instead lol

+$50 is a bit rude just to swap them over, is he balancing them as well? Even still.. phwaar!

LOL @ Flamin Mongrel being the replacment word for CUN7

I got done for 65buxs to get tyres changed...one rim has a slight buckle and the wrong tire, so i got them to swap it over with one of the tires on the car...was expecting around 30buxs. for sum reason it took them 40minutes and 65 of my dollars, wont name the shop in o'connor but wasnt too happy!

^ ^ Really?

They changed mine over and disposed of 'em for free last time, after I bought new tires and got 'em balanced. That bit was kinda expensive, but it rolls incredibly now =D

Yeah mate, but I didn't buy the tyres from them though, I bought them over East and still saved $150-$200

yeah he said that was to balance too, ill be keeping the old ones for burnouts as they've got a fair bit of meat left there just mismatched and camber wear.

hey rhys have u got a machine? ur probly round the corner from me ur in alexander heights too ay ?

dunno about other tyre shops but my dads tyrepower charges $5 per tyre to dispose of them as it costs a lot these days, have to use a licensed disposer n shit. if you buy new tyres the fitting, balancing and disposal of old tyres is all part of the cost of the new tyres.

cant remember what he charges for changeovers but when it comes to small jobs like that, cash is your friend

and the tyre shop was right, low profile tyres are a fair bit harder to change without the right machine. even with the right machine if they're upside-down rims, they're a prick to change.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...