Jump to content
SAU Community

Recommended Posts

i have a r32 rb20det car started on thursday tryed startin it on saturday wont start turns over and allmost starts then dies thought it was a fuel problem took off one of the fuel lines that goes in the injector rail and turned the intion on car pumped fuel fine any one no what it could be

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/
Share on other sites

dose it jump start ok ???? if so check the charge rate on the battery with a multi meter. It should read read about 13.7 volts with all accessories on and lights. Than charge the battery and test it if is stuff could have a dead cell in the battery

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5236426
Share on other sites

Do you have a multi meter. If so check the voltage drop on the battery it shouldn't drop below 9.5 volts. if thats ok check the voltage drop onto the starter motor itself by testing the voltage at the starter main power feed wire and the earth on the battery. It could be as simple as a lose earth or power cable.

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5236446
Share on other sites

Yeah it could be that just pull a coil pack out with a plug in it and turn it over to see if you have spark. But if it dose not crank easily i be leaning towards the electrical side of things with the starter motor.

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5236453
Share on other sites

checked my car today still couldnt get it to start its poping a fuse under the dash the top right second to the end fuse its a 15amp fuse it says its an acc fuse does any one no where this fuse goes or if it would be stopin me from startin my car i checked all the wires and taped up all the dogey wires hasnt helped all plus swap the inighter pack over with another one that i know works wasnt that

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5237431
Share on other sites

yes you need a tool called a noid light i dont know if thats how you spell it to see if the injectors are getting a signal or you can use a automotive stethoscope and listen to the injectors themselves to see if they are firing.

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5237834
Share on other sites

Ohh sorry i meant Beagle!, i had a similar problem but i was converting my s13 from ca18de auto to rb20det manual, and had no spark of injector pulse turned out to be a faulty loom, but i highly doubt it because ur car is stock and untouched well the loom is. so my next suggestion is get a mate with a 32 and swap cas over, that will control spark and injectors

Link to comment
https://www.sau.com.au/forums/topic/320877-car-wont-start/#findComment-5245623
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...