R33 N/a Perfortmance Exhaust

[N/A 33]

hey guys new to this site, just got myself a N/A 33 and the exhaust is already shitting me, its stock with a cannon, im looking for a increase of performance just wondering wat the best way to go and the best brands and prices if ya can helpme out

[R34 -_-]

http://www.skylinesaustralia.com/forums/Po...sp-t194033.html

that should have most of the information you'll need, with brands it best not to go for the cheap fix as they are almost always crap, pay a good price for a good product

Edited May 18, 2010 by R34 -_-

[N/A 33]

http://www.skylinesaustralia.com/forums/Po...sp-t194033.html

that should have most of the information you'll need, with brands it best not to go for the cheap fix as they are almost always crap, pay a good price for a good product

cheers bud, doesnt really specify in that post though, i was thinking a nice set of extractors with maybe a 2.25 or 2.5 system with high flow cat and i nice muffler, no cannon, sound anygood?

[AYW550]

cheers bud, doesnt really specify in that post though, i was thinking a nice set of extractors with maybe a 2.25 or 2.5 system with high flow cat and i nice muffler, no cannon, sound anygood?

i think anything without a cannon sounds good, lol.

[Jezza-gtR]

hey guys new to this site, just got myself a N/A 33 and the exhaust is already shitting me, its stock with a cannon, im looking for a increase of performance just wondering wat the best way to go and the best brands and prices if ya can helpme out

Get tuned length extractors, keep your stock cat or get a high flow cat if you can afford the $$$, 2 1/4 piping with whatever nice muffler (normal / high flow) tickles your fancy. That should set you up with a street legal nice system.

[R34 -_-]

I measured my exhaust pipe when i had my cannon replaced and its only 2 1/4inch!! man was i annoyed now i know why my top end isn't that great, bottom end is great tho...

i would go with 2.5inch if i was you, but don't get a huge cannon on the end and if you can afford to, get a straight through resonator put on

[N/A 33]

I measured my exhaust pipe when i had my cannon replaced and its only 2 1/4inch!! man was i annoyed now i know why my top end isn't that great, bottom end is great tho...

i would go with 2.5inch if i was you, but don't get a huge cannon on the end and if you can afford to, get a straight through resonator put on

thanks for the help. any ideas on the dollars i should be paying for that type of system, just dont wanna get ripped.

[R34 -_-]

Mine cost $1100 for headers/extractors a resonator and a descent cannon, that was custom made with Coby branded parts.

If you pay anymore then that then your probably getting ripped off.

[N/A 33]

Mine cost $1100 for headers/extractors a resonator and a descent cannon, that was custom made with Coby branded parts.

If you pay anymore then that then your probably getting ripped off.

thanks bud, how are the coby parts?

[AYW550]

thanks bud, how are the coby parts?

ive got coby extractors on mine 2, the seem good so far, higher top end power and more response,

but the factory welds were 2 thick and the shop had to grind 2 of them down a bit to get washers on the bolts , but someone on here said coby has now addressed that issue? and someone also complained that they had the exhaust header flange warp, but it must not have been bolted up right cos its pretty thick, like 6mm

[N/A 33]

ive got coby extractors on mine 2, the seem good so far, higher top end power and more response,

but the factory welds were 2 thick and the shop had to grind 2 of them down a bit to get washers on the bolts , but someone on here said coby has now addressed that issue? and someone also complained that they had the exhaust header flange warp, but it must not have been bolted up right cos its pretty thick, like 6mm

how much did they set ya back man and where abouts did u find em?

[AYW550]

how much did they set ya back man and where abouts did u find em?

im in NZ, and they are made here... there were only 270 NZD

[central coast person]

The best sounding exhuast system for a NA skyline would be

DKNE extractors - $500 with HPC coating is what i got mine for....

Custom front pipe and 100cell cat 2.5" - $500 again

Kakimoto Racing Kakimoto R (r33 NA 75mm muffler) - $1000

This is a really quiet setup its about 77dB but you can get it really loud if you ever wanted to buy just removing the intake silencer box in your engine bay. Pretty hefty price for a good exhaust system =\

[Serg]

I got a set of dkne extractors to be put in, just waiting on a varex muffler or cannon (still cant make up my mind to witch one to get, any care to help? PM me) ... quoted 500bucks to get it all installed with a high flow cat and 2.5" mandrel bent piping... Ive been told its a fair price and a good setup...

[TwoCents]

I got a set of dkne extractors to be put in, just waiting on a varex muffler or cannon (still cant make up my mind to witch one to get, any care to help? PM me) ... quoted 500bucks to get it all installed with a high flow cat and 2.5" mandrel bent piping... Ive been told its a fair price and a good setup...

Thats exactly what i have, its a great setup imo. The varex + highflowcat eliminated 90% of the horrible raspy noise i had with just some random cannon on 2.5inch pipe with dkne extractors. Also have a resonator id recommend one

[Duchie]

If anyone is still on here, does the resonator cause that shitty rolling noise from like 2500-3000?