Jump to content
SAU Community

Recommended Posts

Looking at 225/40's on the front and 235/40's on the rear! Was

thinkin +25 cos wasnt sure how much camber i will need run gunna roll the gaurds though! Gettin +20 on the rear! Would the front tuck in u reckon?

Go the +20 all round.

9.5s are not too wide for the car.

What size tyres are you looking to run on it?

Sorry, if its a GTSt with std guards, even if the insides are rolled then its my experience that sized rim will not have a hope in hell of fitting on an R32 GTSt

At best you will get a 9" +28 or so on the front and a 9.5" + 36 or so on the rear. Even that will fill out the guiards and probably rub depending on ride height and tyres used.

A far better bet for a decent stance is 8.5" +30 fronts and 9" +30 rear. For the size tyre you want to run then they will fit that sized rubber better too.

I have very heavily pumped guards on my car and here is a pic of it with 350/340mm ride height and R34 GTR rims which a 9" + 30 all round They clear nicely with no rubbing. But you are talkign rims that are about 12mm wider and with a further 10mm offset. No way i can see them fitting with std guards!

19871_340712444740_606454740_4925665_2915896_n.jpg

19871_340709514740_606454740_4925653_7614877_n.jpg

One of my mates got a 32 gtst aswell hes got 17x9+17 all round with in gaurds taken out and gaurds rolled! So im thinking more along the lines of 18x8.5+17 on the front! And 18x9.5+20 on the rear! Would that work! With 225/40's on the front and 235/40's on the rear!

  • 3 months later...
Sorry, if its a GTSt with std guards, even if the insides are rolled then its my experience that sized rim will not have a hope in hell of fitting on an R32 GTSt

At best you will get a 9" +28 or so on the front and a 9.5" + 36 or so on the rear. Even that will fill out the guiards and probably rub depending on ride height and tyres used.

A far better bet for a decent stance is 8.5" +30 fronts and 9" +30 rear. For the size tyre you want to run then they will fit that sized rubber better too.

I have very heavily pumped guards on my car and here is a pic of it with 350/340mm ride height and R34 GTR rims which a 9" + 30 all round They clear nicely with no rubbing. But you are talkign rims that are about 12mm wider and with a further 10mm offset. No way i can see them fitting with std guards!

19871_340712444740_606454740_4925665_2915896_n.jpg

19871_340709514740_606454740_4925653_7614877_n.jpg

Hey roy,

what size tyres are u running there?

cheers mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...