Jump to content
SAU Community

Recommended Posts

Hi hows it going,

I currently have a Nissan Skyline r33 Series 2 gts-t, its got a few issues with it currently, it currently has a Front Mount Inter cooler, used to have a HKS Blow Off Valve but replaced it with the stock one. It has a 3" Full Exhaust, as well it has a Automatic boost controller however its got the display sort of smashed, so going to replace it soon with a manual one it as well has a turbo timer.

One of the issues is that its blowing black smoke and there and its leaking the black stuff from the exhaust onto the floor, also there is sense of a strong smell of petrol. My assumption its running quite rich, so im guessing could it be due for a tune, or it might be running too much boost but ive reved it ideling and it has been showing the 7 pound of boost. The car is currently unregestired however its never been driven, so dont if reving the car shows its real boost.

My 2nd question is, the oil is pretty much black, so would that mean its time for a oil change and oil filter change.

My 3rd question, is when sometimes its ideling it turns it self off so i was wondering could this be miss fires, or is it just due for a tune. Because im thinking maybe i need to replace the spark plugs. Also when its been slightly reved on a warm engine, sometimes it will shut off and wont turn back on until you give it about 5mins and it will start right back up. If i start it up straight after it will struggle to start up sort of like an old car.

If you could help me, it will be greatly appreciated.

Yours Truly,

Moz09

Link to comment
https://www.sau.com.au/forums/topic/321318-r33-skyline-problem/
Share on other sites

Get the O2 sensor checked, most common cause of running rich.

Oil shouldn't be black, so definitely change that. I would personally change it anyway as you don't know what the previous owner had been using.

When you returned the bov to stock, did you plumb it back properly or is it venting to atmosphere? If it is venting to the atmosphere then that could also be the cause of the car running rich

sounds like you have a mild vacuum leak sumwhere, check all vacuum lines, intercooler pipes etc

if that fails, check your air flow meter (borrow sum1 elses and fit it to see if it still runs the same)

if that fails, post here again and ill keep thinking, theres lots of things i can list but some more obvious/easy things to elimate first before the not-so easy stuff has to be checked, like injectors etc

Sounds like a combination of running rich and a vacuum leak as snozzle said (I'd be trusting his opinion on this, he's a champ :devil: ) I'm wondering, when your car "dies/turns itself off" does it hunt for a bit before it does? By that, I mean do the revs at idle just start going out of whack and then stall? If so then I'd definitely say vacuum leak somewhere. If this is the case, you can use something like carby cleaner and spray it around the intake manifold and pipes beforehand, you'll hear if it is

  • 2 weeks later...

Alright guys this is Moz09 however i have left the settings on my other computer which is out of use for now so using a mates account temporarily.

Anyways i found the vacuum issue as it was down to my boost controller vacuum line as it wasn't the right size one and was leaking, so ive replaced that now.

So this issue has been fixed, Ive as well done an oil and oil filter change.

However i still have stall's when its idling and its running rich still and still has backfiring issues when running idle, like you can actually feel the backfiring when your sitting inside.

Although I have thought about getting new spark plugs, but i don't want to chuck away money just yet, because i might not sure if new spark plugs will cause these stalls.

I haven't replaced the automatic boost controller yet, as i think it could be down to the automatic boost controller as sometimes the car wont rev past 2.5k and my mate told me its called a leap mode, so im going to replace it this week with a manual one and see if it fixes it.

However im still not 100% sure if it will fix the stalls, i am more interested in fixing the stalls currently rather then the car running rich and backfiring, however if you have any suggestions what could be the cause of the back firing and stalls as well it running rich.

Im guessing maybe the running rich issue is down to the ecu as i know the stock one does run rich but would the backfiring be the cause as well or?

I also have one more problem, sometimes when you actually let it warm up to like an operating temperature and you give it gas to about 4k, it will sometimes just shut off immediate would this be a cause of a another vacuum leak or misfire?

Hey hows it going, i switched today to the manaul boost controoler, im going to go tomorrow to buy some copper ones, however i eliminated the black exahust smoke problem as it was running quite a bit high boost before.

However i still tend to get a bit of a struggle around the 2.5k-3k mark when it comes to reving it as it will strugle to go past that so im guessing some sort of vaccum problem, however i looked at all the cables and intercooler piping and cant really find a leak.

Does anyone have any suggestions were i should look else?

I read somewhere about a small vacuum / airhose that used to go air box that if blocked, caused the car to to have a flatspot at the above rpm.

Try find a blocked hose or if someone else can elaborate cause its been 5+ months since i saw the thread with this info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...