Jump to content
SAU Community

Swapping An Sr20 Into R32 Gtst

Paradis v.1
 Share

Recommended Posts

mad082 Grand Master

mad082

Posted
Posted
why would you take out the beutiful RB !!! =(

because an sr20 is a better motor than the rb20. and a 2.2L stroker sr20 is even better again, LOL

there are a few sr20 powered r32's and also cefiros. not sure how many are actually on this forum, but i have seen some on here before.

NZM.031 Grand Master

NZM.031

Posted
Posted

im doing it... will have the engine in mid july... its a simple deal.. just need the sr20 crossmember..

i struggled with taking the RB out... but at the end of the day, its going to be a pure track car.. possibly even a time attack competitor.. so logically... the sr20 is the better engine... 70kg lighter... sits much further back.. and has a tried and tested path... you know that if you add this, plus that.. it will equal X amount of power.. as opposed to spending x amount on an RB20 and getting untried results or a possibly weak engine.

there is one or two on NS.com... a nice light blue one.. i think most of them come from japan with the sr20 in them.

cheers

Linton

Nic_A31 Grand Master

Nic_A31

Posted
Posted (edited)

Dunno about the R32 chassis, but on the A31 it sits further back, so it gives better weight distribution/handling. Common swap in Japan for that reason, and makes rego+insurance cheaper.

http://www.skylinesaustralia.com/forums/32...amp;hl=r32+gtst

Recently sold. JWS in WA did the swap on that one.

Edited by Nic_A31
Paradis v.1 Enthusiast

Paradis v.1

Posted
  • Author
Posted (edited)
why would you take out the beutiful RB !!! =(
I'd sacrifice the power for the sound of a RB any day

Believe it or not, losing that straight six sound was the point i struggled with the most.. :) I loved my RB.

But at the end of the day, I had taken that stock motor as far as it could go. I had done everything around the engine possible including using the ViPec and hiflo to run 300whp for the last couple years, but it's always felt like a thrown together mess of parts. I was either going to upgrade to a GTR this year, or build an engine.

Opportunity knocked with friend who was parting with his b.crower built 2.2 with gt35. only has 300kms on it. couldn't resist getting 500+whp.

im doing it... will have the engine in mid july... its a simple deal.. just need the sr20 crossmember..

i struggled with taking the RB out... but at the end of the day, its going to be a pure track car.. possibly even a time attack competitor.. so logically... the sr20 is the better engine... 70kg lighter... sits much further back.. and has a tried and tested path... you know that if you add this, plus that.. it will equal X amount of power.. as opposed to spending x amount on an RB20 and getting untried results or a possibly weak engine.

Heh, true. But you're right. There's alot of advantages, less weight (+my block is even lighter than a stock one), sits sooo much farther back (weight distr), and there's just a better history of knowledge and support on the SR, being that RB20s faded behind the 25 fast after 93 (though in canada they're still everywhere since we have the 15 year law)

mods list needed (for me anyway)

need the crossmember (tried modifying the engine mounts on the old one, didn't work)

drive shaft needs to modified

transmission mount needs to be modified (this was easy)

and depending on the manifold you're using, i had to grab a different slave cylinder that was shorter (engine sat too close to the firewall). Used one off a Sunny GTi-R that was lying around.

Guess you probably need a throttle cable too, though i already had one i was using for a monstrous plenum i had built.

-Cheers,

Chris

Edited by Paradis v.1
Paradis v.1 Enthusiast

Paradis v.1

Posted
  • Author
Posted
Shit....that's alot of spare room in the R32 (hadnt seen an engine pay pic that close before).

That must drift like f**k.

I dunno know yet :)

Ya its disgusting how much room there is, and how much weight i think i just shed.

  • 1 month later...
jeffers1987 Collaborator

jeffers1987

Posted
Posted

hey mate if you need any advice, i have a sr20 powered r32 as well. best choice ive ever made. car handles sooo much better. are you on secretdrift at all? if so there is a thread on there. best to contact me on there as i use it pretty much every day. glad to see more sr converts. just a shame its in a 2 door. :)

bman Enthusiast

bman

Posted
Posted
hey mate if you need any advice, i have a sr20 powered r32 as well. best choice ive ever made. car handles sooo much better. are you on secretdrift at all? if so there is a thread on there. best to contact me on there as i use it pretty much every day. glad to see more sr converts. just a shame its in a 2 door. :)

im about 2 weeks from doing this conversion, just wondering if you got it mod plated and how much cost / drama it was? putting it in my pride and joy post-32674-1278933068_thumb.jpg

Paradis v.1 Enthusiast

Paradis v.1

Posted
  • Author
Posted
hey mate if you need any advice, i have a sr20 powered r32 as well. best choice ive ever made. car handles sooo much better. are you on secretdrift at all? if so there is a thread on there. best to contact me on there as i use it pretty much every day. glad to see more sr converts. just a shame its in a 2 door. :down:

Hey there,

No I'm not on secretdrift, link me to the thread if you could please!

As for where I'm at, we had a few gremlins in the electrical system and needed a different trigger wheel, took us a month to get it all cleaned up. It drove for the first time last weekend. Doing the full tune later this week i hope.

  • 10 months later...
  • 2 years later...
Noddy42 Apprentice

Noddy42

Posted
Posted

Sorry to bring up an old thread, but im currently putting an Sr20 into a r32 4door. Just wondering?? What did you do to the loom to get dash plugs conected? also anything that you didnt hook back up? boost solinoid canester etc?
Any help would be greatly appreciated

SR20 R32 Enginebay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 GT > GTT compatibilities

      By Kinkstaah · Posted

      Ye, in terms of bolting up the "Conversion" from a GT to a GTT is effectively "Use GTT parts for everything" Except the subframe itself, because you won't want a HICAS/4WS subframe. Remember your ABS system will be different too, thanks to GT being the S15 3 sensor system, instead of the R34 4 sensor system for wheel speed. I do not know how people get this to work given R34 diffs do not have a provision for an ABS sensor (they are on the tone wheels of the axles). I assume***** people use S15 gear/R34NA forever when they realize this - Or they convert it to a rear diff/axles that are R33 style which I presume has the singular speed sensor on the diff itself, but then you have to wire it all in and...and... and...
    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Foreshadowing was never so easy.
    • GTSBoy
      Rear hub bolt torque r34

      By GTSBoy · Posted

      The ones in brackets are the first stages of tightening. I usually aim for the middle of the range. They give a range because it's actually not that critical to hit exactly the right bolt tension. Enough is enough, and too much is too much, and the range given is inside that range. Half of the bolts in the suspension are problematic for putting a torque wrench on anyway, so just get done up to mechanic tight  and spanner checked a week later.
    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      Is the problem that we just disconnected the line, does it need to be plugged? I’d rather not buy another master cylinder
    • GTSBoy
      R34 GT > GTT compatibilities

      By GTSBoy · Posted

      Clutch is same same. Tailshaft is not. Diff will drop in. Half-shafts will not mate up (5x1 on turbo, 3x2 on NA). There is also the strong possibility that your auto NA gets its speed signal from the sensor on the diff, not the gearbag, and that will leave you without a speedo. You can do all this, you just have to do a lot more than you thought.
×
×
  • Create New...