Complete Custom Wheels

[handbrake]

18 x 10 CCW C10 wheels

anodised black

seems to be reasonable brake clearance, more than 6mm at its tightest

offsets difficult to judge whilst suspension is not under load but should be aggressive without sticking out too much by my estimates, fingers crossed for when the slicks are mounted and the car sitting at ride height.

[handbrake]

[handbrake]

Car not under load so should tuck in.....

daily driver wheels not under load for comparison of offsets. slightly more aggressive but hopefully will fit with tyre on rim! guess I will wait and see!

[LSX-438]

clearance looks good, better than te37 or rota

[handbrake]

Yes, from the inside of the rim I can almost slide my little finger all the way between the caliper and inner barrel along the entire length of the caliper

[GHOSTrun]

They remind me of BC P1's..

[GT-Ricer]

They remind me of BC P1's..

Because they're round...?

[Adriano]

And black like yo mama

[fireball]

what offsets are those ?

interested cos i think i might get a set and wouldnt mind seeing if it fits on my little car

[handbrake]

hey John,

they are 10 inch wide with 6.6 inch backspace - bit rough to convert but maybe +27mm??

welcome to try them on anytime if thats close

though with the times your car is getting already i dont know if I should!

[fireball]

hmm that offset might work but might have to come and try it out one day

can u weigh the wheel as well ? cheers

mind if i ask how much they are ? and where to get them from ? pm me if u dont want the world to know the price

as i found out at superlap, u can never have enuff tyre on the road

[JamieR34GTT]

Nice rims got to get some new ones myself.

[handbrake]

offsets works well up front. will be tucked in at the rear. I reckon I will need a 15mm spacer but will wait and see.

plenty of brake clearance, tried to demonstrate with backlight as I know many of you are interested

[LSX-438]

they look great Mark, nice work.

[handbrake]

thanks Duncan.

only went with this set up after you had done all the hard work trying various wheel/tyre combo's

i would recommend the CCW for anyone who is interested in 18 inch track wheels and is concerned about brake clearance

[70RTY]

Great work Mark! I am keen to see how those slicks perform. I see you also use ramps to get the car up on the hoist.

[handbrake]

Thanks Stuart

Stock 20's were ok getting on the hoist but lowering the car onto the 18's required the ramps due to about 10mm drop in ride height

[handbrake]

The new wheels and 27/68/18 second hand michelin porsche cup slicks worked well today. As did all the other mods Trent and the boys down at Mercury have been frantically finishing off for today. more on that some other time.

here are some pics of the wheels on at the track. Just over 3 degrees camber, about 15mm lowered. no rubbing.

55.67 on the sprint and 58.12 on the Clubman at QR

[dazmo]

Nice work Mark looks like the car is progressing alomg nicley. Glad that the missus has come around for you as well. What sort of times where you able to put in at the track on the slicks and with the new mods?

[LSX-438]

the CCW's look fantastic Mark.