Jump to content
SAU Community

Recommended Posts

If the sensors are faulty would the ECU stop the car from firing?

My RB25 ran fine for awhile then died (sounded like it ran out of fuel). It just winds over now, sounds like it is just bout to kick then starts winding up again.

I have replaced my spark plugs and coil packs (tested for spark), replaced my Fuel Pump and confirmed fuel is getting to the rail and can smell fuel in the cylinder after winding. Checked my timing and valve gaps. Also tested with another ECU incase mine was faulty - same thing occurs (mate was sure it was the ECU)

The only thing i can think off is electrical, i have gone over the loom probably bout 5 or 6 times checking all the terminals and cleaning the contacts and also checking Fuses visually and with a multimeter.

Just thought i would ask incase anyone has any other thoughts before i take it to someone.

the 02 sensor can be disconnected and the car will drive fine. it generally runs richer when it isn't working properly.

if you turn the car over with 1 of the coils pulled out and with a spare spark plug earth to the engine, does it spark? if it doesn't then it could be the crank angle sensor.

does the fuel pump prime when you turn the key to "on"? you said you have replaced the fuel pump, but if the fuel pump relay is shot then it might not be getting power to it.

also try disconnecting the afm and see if it starts.

Sorry what is WOT??

I have tested spark by doing as you stated.

And yes the fuel pump does prime. and confirmed fuel is coming out near rail by disconnecting the feed line and confirming fuel pumps out.

I have also tried using "Start ya Bastard" with no luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's no way they left the factory like that. In R chassis there is nothing stopping the steering wheel being put on one spline out from straight, and then adjusting the steering arms to "correct" it (sort of). As well as the indicator cancelling there would also be an issue with how tight you can turn in one direction to the other. The other (less likely) possibility is that the "clock spring" (the circular electronic part that allows the wheel to turn while still having an electrical connection for horn and any other buttons like cruise) might not be in place correctly. I don't have any pics of the R33 (or Stagea) setup but there would be a circular locating tab which sits in the steering column to have it straight...if that is not seated properly then the indicators may not cancel at the right point (and, you might also get a HICAS error since it would think you are driving in circles)
    • It will mostly be bad scoring on the bores, which you can almost certainly fix by machining for oversize pistons. I have to say, I am super surprised that any standard turbos made it 35 years down the track before exploding!
    • Thanks for the info mate was thinking 255/35 rears and 235/40 fronts
    • What's the difference? I would have said that between the front and rear axle lines, there's no noticeable diff between a GTR and an NA 2-door.
    • It will be salvageable. It really doesn't matter what is damaged. Opening up a 30+ year old motor for a rebuild immediately means a complete rebuild of the head anyway. Damaged valves just means an opportunity to put in some nice new ones. And in the modern day, why would you not throw at least a nice set of pistons at something. And if you're doing that, why not rods, and ARP fasteners, and so on.
×
×
  • Create New...