Jump to content
SAU Community

Recommended Posts

I'm looking to upgrade the fuel system with 2 x bosch pumps and a surge tank.

To keep it legal the fuel system cant be mounted in the boot, plus id like to keep the boot space. With the limited room underneath how have people over come this problem?

PS: I have a 32 GTST.

Edited by Alf
Link to comment
https://www.sau.com.au/forums/topic/322054-undercar-surge-tank-pumps/
Share on other sites

I'm looking to upgrade the fuel system with 2 x bosch pumps and a surge tank.

To keep it legal the fuel system cant be mounted in the boot, plus id like to keep the boot space. With the limited room underneath how have people over come this problem?

PS: I have a 32 GTST.

Autosport (I think its brads R32 gtr) had this set up.. looks very neat.

Speak to EFI performance. Pierburg external fuel pump. No need for surge tank.

A pump alone wont be enough when the fuel in the tank moves away from the intank pump, thats why a surge tank is needed.

I'm using an 023 intank.

Edited by Alf
A pump alone wont be enough when the fuel in the tank moves away from the intank pump, thats why a surge tank is needed.

I'm using an 023 intank.

Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

Edited by RBceffy25
Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

Forgive me if I'm wrong, but a draw/push pump is self priming? It can recover from the air in the fuel lines quicker?

I still can't see how this is supposed to replace a surge tank.

The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Ive seen a few jap gtr's with a similar design is it based on a sard item?

It's not based on a sard item.

I jacked my car up, saw a large space near the driveshaft with nothing there, went to autosport and told them what to do and what I wanted. Greg and brad did the rest. I can't weld to save my life.

I wouldVe liked it to be tucked up further but then it wouldn't be as big. Flow was a concern as Brad and Greg figured out the tank had to be over 4L for the pumps I'm using.

The timing worked out great, they fitted all the rest of the fuel setup and the motor aswel. I always recommend them.

Yes I know what a surge tank is for. I understand what you are saying but I have been assured you wont need one with this setup.

Here is a 'quote' from an email from Rick at EFI

"We recommend you look into an extra external pump we use and recommend (pier berg) high volume fuel pumps which are a draw and push pump capable of 350L per minute @ 3bar where the bosch 044 external is only a push pump and with its expensive fittings ect they are rated at only 200L per min @ 5bar."

"We have used these pumps on over 40cars now and are really taking off, they can be used with C16, methanol and are also E85 user friendly where the bosch pumps are not."

Like i said, I reccommend speaking to the EFI guys. They are really helpful and great to deal with.

Any love for the PierBurg?

they dont say anywhere that the dont require the use of a surge tank and all pumps have to pull push as the fuel doesnt get gravity feed into them.

It's not based on a sard item.

I jacked my car up, saw a large space near the driveshaft with nothing there, went to autosport and told them what to do and what I wanted. Greg and brad did the rest. I can't weld to save my life.

I wouldVe liked it to be tucked up further but then it wouldn't be as big. Flow was a concern as Brad and Greg figured out the tank had to be over 4L for the pumps I'm using.

The timing worked out great, they fitted all the rest of the fuel setup and the motor aswel. I always recommend them.

thats a perfect spot stevo. for a little more detail its the same on the GTSt and the spot is on the drivers side just in front of the back wheel. basically under the rear seat.

The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Any idea on prices to get one made up (to suit an R32 GTR)?

My mate and I made one the same as the process west unit for his xr6 turbz. Except instead of a billet tank welded down I just folded it up out of 3mm ally and welded it down to a lasercut plate. Turned out much the same and saved the expense. No need for a flashy unit when its tucked under the car and getting dirty constantly.

Edited by r33_racer
The system on steves gtr was built and designed by myself from steves guidline of everything in one unit under the car.

The current ones I'm using on my GTRs have individual chambers supplying the pumps and are foam filled to settle the fuel a bit more.

I rather use them with dash fittings as opposed to barb tails and clamps.

They work well and are realativly inexpensive.

Any idea on what one of these surge tanks cost?? Was it a custom one off job or an off the shelf item?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...