Changing Injectors On Neo Turbo

[Randon_I_Am]

as above, my tuner said i wouldn't need one as they use O-rings or something...

just want to have this confirmed before i take off half the manifold

Cheers Pat

[Trozzle]

l2p

[chuckie]

as above, my tuner said i wouldn't need one as they use O-rings or something...

just want to have this confirmed before i take off half the manifold

Cheers Pat

Hi PAT , Well it`s a METAL gasket,

So it may be fine ,

i did mine & it was ok ,

But next TIME I WILL REPLACE IT , there not a Cheap Gasket,

Good Luck ,

Cheer`s Chuckie.

[chrisR34GTT]

Pretty sure I read that you can replace the injectors without touching the manifold? DIY section??

[RBceffy25]

It’s a metal gasket with rubber on either side. The rubber will probably be pretty worn out so if you must take the plenum of to get to the injectors I would probably recommend replacing it. The genuine Nissan item is about $80! Get yourself a plazmaman item as I think they are bout $30 or so and have special high temp resistance and so on...

Edited May 26, 2010 by RBceffy25

[666DAN]

Yes there is enough room (just) to replace the injectors without removing the runners or manifold, you just have to decide what method will be more of a c$#t to do.

[allthewaytotheskyline]

use gasket glue..dont be a pansey!