Jump to content
SAU Community

Recommended Posts

Hi all,

on behalf of Nick @ GT Garage a big thank you to everyone that attended and assisted on Saturday night. It was a highly entertaining event and GT Garage has already locked in a date for the next dyno day in approximately five weeks time smile.gif.

Congratulations to Darren Anderson for taking the outright power and power per litre trophies. A great effort to come all the way from Burnie for the event.

For those wondering about the accuracy of the dyno, it is as accurate as any dyno in the country. However in saying that a dyno is primarily a tuning tool, try not to get caught up with 5kw here or 10kw there. There are so many variables that can affect a cars power.

Just for reference, R32/R33/R34 GTRs were all limited to 206PS from factory, the white R32 GTR V Spec 2 and the R34 GTR M Spec Nur both made within 5rwkw of 200kw at all four.

Oh and Dave Michaelson's R33 GTR made 415oddkw at all four, not at the rears. Darren Andersons R33 GTR was run in RWD.

Ben

580rwkw

Hey Guys,

Is there anymore footage of the night? Was that Kutzie on the right hand side???

Cool run...

Nick's done an awsome job with the dyno cell!!!!!!!

Is anyone racing they're 1/2 megawatt GTR's??? Ha ha ha......

Are there any servo's with E85 around Hobart yet?

Cheers

Justin

e85 in tasssie at the pump - NO

Yes that was kutzie

and yes nick has done a top job!

Ha ha ha it took 6 or 7 years to get 98.... Probably going to take 10 to get E85!!!

That was kutzie.... ha, interesting.

Weeell little Nicky is awsome, so I should expect nothing less.... I cant wait to get back and give that dyno a good work out.

Cheers

J.

Ha ha ha it took 6 or 7 years to get 98.... Probably going to take 10 to get E85!!!

That was kutzie.... ha, interesting.

Weeell little Nicky is awsome, so I should expect nothing less.... I cant wait to get back and give that dyno a good work out.

Cheers

J.

haha i nearly fell over when i saw him there too :thumbsup: , speaking of little nicky , he's getting e85 by the barrel for ben p and the smith brothers :D so if your wanting some go have a chat with him :P , how you been anyway justin? when you coming back to tas???

haha i nearly fell over when i saw him there too :D , speaking of little nicky , he's getting e85 by the barrel for ben p and the smith brothers :P so if your wanting some go have a chat with him :P , how you been anyway justin? when you coming back to tas???

Hey Toff...

Been good mate- buisy, soaking up the rum, sun and fun here in the caribean and the medditeranian and Alaska and Bahammas.... hahahah... I'm a superyacht engineer, so rich guys pay me to fix they're toys... 180ft boats, cars and the odd helicopter (well I just help out with the aircraft). It's cool, but it's still a job:

I miss my car though... So I'll probably be comming back in 8-10 months.

My going away party was killer- so maybe a comming back bash is in order???

yeah I had to watch the video clip 3 or 4 times to make shure it was him... :thumbsup:

I'll more than likely run e85 in the big girl... Just got my Injector Dynamics ID2000 injectors wooohooo!!! I used to buy barrells of 98 when you couldn't buy it out of the pump, e85 will be the same.

Cheers

Justin

Hummm,i was there till 4.30,too cold,an no one wanted to chat,what's that saying don't judge a book by it's cover.Oh well i thought love of the skyline was ageless,maybe i was wrong.In lonnie now,maybe i will meet some locals here for a chat. :banana:

I'll more than likely run e85 in the big girl... Just got my Injector Dynamics ID2000 injectors wooohooo!!! I used to buy barrells of 98 when you couldn't buy it out of the pump, e85 will be the same.

Cheers

Justin

Have you factored in the extra consumption that you will get from running E85?

Might make it an unviable option to run in a street car unless you plan on driving around with Jerry cans, the fact that it is unavailable at the pump in Tassie makes it a bit of a logistical nightmare for making the switch.

I am about to convert my tarmac rally car to E85 but even with a race car the excess consumption will prove to be a headache shifting the car to events and in between stages without carrying spare fuel (which unfortunately is not always an option).

I know from feedback from a few of the mainland guys that have made the switch that usage has increased 30-40%....food for thought anyway :banana:

Have you factored in the extra consumption that you will get from running E85?

Might make it an unviable option to run in a street car unless you plan on driving around with Jerry cans, the fact that it is unavailable at the pump in Tassie makes it a bit of a logistical nightmare for making the switch.

I am about to convert my tarmac rally car to E85 but even with a race car the excess consumption will prove to be a headache shifting the car to events and in between stages without carrying spare fuel (which unfortunately is not always an option).

I know from feedback from a few of the mainland guys that have made the switch that usage has increased 30-40%....food for thought anyway ;)

Hey mate,

The extra fuel useage shouldn't be an issue... I'll only be running E85 for drag racing and the occasional track day. Ha ha ha... I used to carry jerry cans of 98 and toluene with me, when I ran up and down the west coast.

I'll be able to change maps easily enough with the new ecu.

thanks for the thought though

Cheers

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • does anyone know tie rod torque setting and anti roll bar for r34? Is there a workshop which shows various components torque setting?
    • Hi    have purchased pair of eibach wheel spacer as I couldn’t fit set of wheels I bought for my car due to it catching caliper.   I know I need to cut the bolts on my discs so they sit flush with the nut supplied but the nut doesn’t sit all the way into the groove meaning wheel would not directly fit onto the spacer rather the nuts. Any thoughts?   See pic   https://ibb.co/VJK5w5G
    • Nah. There's not shit tonnes of pressure in there. Just drill with a 1.5mm drill or something equally tiny. When the drill goes all the way through thee gas will start to come out, but with such tiny path through the flutes of the drill bit, it won't be at all dangerous. You can be as paranoid as you like from then on. I'd just pull the drill out while keeping my face out of the line of fire. But then, I spend half my time looking into pressurised furnaces. So my risk acceptance is somewhat higher than most!
    • Been needing a new clutch for a while, but holding off because of life tingz and adulting. But... Being of Asian descent, I can't pass on a good sale, especially everyone else is selling it for $2k+ (JJR has it for $1799). Really on the fence on this one, because the unsprung version of this is $1281 via Shitbox (Sparesbox) and the sprung version is quite a bit more (no idea why Shitbox doesn't offer them). Ending up just sending it and getting the twin sprung organic. Mainly because I wanted the car to be nice to drive and didn't want to make it more of a shitbox than it already is.    
    • It was the pressure I was worried about. @GTSBoy does drilling them pose any problems?
×
×
  • Create New...