Jump to content
SAU Community

Recommended Posts

Why do you refer to JDM C110's as 240K's? 240K was the export name for the C110 for AUS and Britain.

I was working to your budget

I referred to it as 240K because for $15k you could get a nice Aussie one for that or less.

(If you were patient and lucky)

But as Ravenoak mentioned there's no way you'd land a C110 for that much and they're essentially the same car

Also remember you are dealing with an Aussie Company - not some Jap registered one that is exempt from taxes here and so on :)

You are as well, dealing with a face/person here in Aus. Should something go wrong it's fixed here - good luck getting some of these Jap based people to sort out such issues quickly/reasonably.

I've known the people behind Import Monster for 6-7 years now, and I get the majority of my stuff via the boys as well as it's just less hassle. I've been dicked around by Jap based resellers of parts and so on and it's a mission. Paying a tad more for the better service is worth it everytime for me!

I bought my first Nissan in September '73 from Capital Motors at Auburn NSW, the very site that is now Reading Cinemas. It was a nice mustard yellow 180B SSS and I bought it because it was quicker than an 240K, not quite as quick as an 240Z until Messrs Ray & Don Selby went to work on it for a week and then no series production 240Z got near it.

Cheers, D

I bought a new March 1974 180B SSS

The newer model unfortunately lost out on the cool centre guages (like the 240Z) and about 5 HP.

Was a cool metallic blue though.

Got it from Duncan motors in Perth (there's now a hotel on that site (Orchard Hotel))

What would you guys reckon about importing a C210 GT-EX from japan?

Would you do it?

I want one but is it worth the $15-20k?

No, no, no.

A JDM GT-EX, and lets be specific here, has different lights, electric windows, mirrors and badges to your Australian C210, in a good way. It also has an L20 turbo (yawn), different seats, rims and steering wheel, and possibly grill and headlights in a much-of-a-muchness to less than good way. Then there is the predictably awful state of any given Japanese interior and engine bay to sort out, after you get the car complied and registered.

In short, why would you pay $15,000 for $2000 worth of interesting parts? Buy the specific bits you need from import monster and throw the remaining 13 grand at... well, whatever you want.

As i understand there were 2 GT-EX's C210 from 1978 then C211 with "modernised" front, rear and interior from 1980.

both had L20ET's and were the highest factory spec of C210/211, if you will, the GTR of C210's.

I'd like one of the later series with all the electrics and fuel injection.

As ive written before my car doesn't have p/s,a/c, electric mirrors/windows.

I don't want to retrofit the above into my AUS export version cause i see it as too much work, whereas bringing one from japan will have everything as factory worn out yes but everything is there.

Are you suggesting to buy GT-EX parts and add them to my car?

Unfortunately the GT-R of C210's is no G-TR of note, I've driven one and it basically sucked. The Japanese L20 non-intercooled turbo with injection makes, according to my Japanese advertising material, 130HP at 6000 rpm. That's a full 4 horsepower less than your stock-as-a-rock single carb L24, 8HP less than an L24E, and 32HP less than a stock L26 with twin carbs. I'd like to imagine that a warm L28 (like mine) would make more power than that again. You could always modify the L20 with bigger injectors, intercooler, computer (I've been driven in a tricked up L20 turbo, and it was exciting)... but if that's the path you're going down, you may as well mod a local engine.

Fitting power-steering (which I prefer not to have on a C210) and air con (which I also prefer not to have) from a wrecked Australian car is a big expensive pain, agreed, but way less eye-watering than the parting with 5 figures. Customs is going to degas your Japanese air cond anyway!

I think if you lurk around import monster, you'll slowly amass the cool goodies you want, without going anywhere near a $15,000 budget. If I were prepared to part with that much to bring over a Japanese car, it'd be for something with a substantial resale value in Australia... unlike a C210.

In short, add the GT-EX parts you like to your existing car.

i don't believe that the L20ET makes less power than my car, that's pretty bad.

I bet some japs feel ripped off when they read that.

Why do you prefer not to have power steering / aircon on a C210.

I don't mind the manual steering, only get annoying when car is fully laden and trying to do carpark manouvres.

I'd like a/c for the summer, related: Do 240K compressor and cabin unit fit in a AUS spec C210?

Cheapset C210 going on Yahoo Cars atm

Import Monster

~$10,000 complied, just don't like how it's got aftermarket stuff on it.

Most Expensive C210 going on Yahoo Cars atm

Importmonster

~$25,000 complied, looks so stock and unmolested.

Stock as a rock L20et as in my Paul Newman does 145PS which equals 106.55 kW which equals 143.01HP @ 5500rpm as opposed to the MR30 Oz delivered L24E doing 93.4kW which equals 125.25HP @ 5600rpm.

L20et is still better, but not something to write home about or get all goose bumpy lol

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
×
×
  • Create New...