Can Cams Be To Big?

[RBeed]

just wondering if cams can be too big? i have a mate with a complete 26 head for sale, and has the following ported, oversize valves, springs retainers etc etc, but the cams are: exhaust Cam Duration 290 with 11.50mm lift, and inlet Duration 280 with 11.50mm lift, im planning on running either twin gt rs turbos or possiably 2530's full house motor, power fc etc,

are these cams too big for a twin turboset up or is it more of a single turbo set up??

thanks guys

[jangles]

id say its defintely been set up for drag!

[hpt_simon]

depends on where you want your power band at.

and also dependes on engine displacement, those cams on a rb26 will be puuuuure drag cams, but on a rb30, i pretty shure you will get peak power around 8000revs. wich can still make a pretty fun track car or even road.

[N1GTR]

Have a look at Marko R1's results with 280 cams

[zebra]

That setup will be a pos to drive around the street on a 2.6, will make big power at WOT and big revs, not something you would want to toddle down the corner shop with.

[bigmikespec]

Buy it without the cams!

[STATUS]

If you go deuce on the GT-RS then it should be quite the weapon.

[RBeed]

cheers for all the input guys guess it wont hurt having them this big

[GTScotT]

if the heads done well and u buy it all for a good price, cams are easily changed if their too big for you.

my 2c.