Jump to content
SAU Community

Recommended Posts

TimeAttackR2.jpg

Phillcom Rally Time Attack Round 2 2010

The Mitsubishi GSR/EVO Club Present Round 2 of the 3 part Phillcom Rally Time Attack Series 2010.

The event will be held at Mallala Motor Sport Park on Sunday 25th July 2010.

The Phillcom Rally Time Attack Round 2 will be limited to ONLY 36 entries, positions are filling fast.

Competition will be based on timed hot laps with ample opportunities to attain a personal best.

The sprint will possess dynamic levels of competition with the introduction of Modification Classes and DOT Tyre Restrictions.

Local Tuner Houses will again battle it out for workshop honours and the outright round win!

Trophies for ALL Classes, privateers are welcome and catered for.

This event is sure to please both competitors and spectators with the best drivers and workshop machines providing non-stop action!

Competitiors must have a minimum L2S or L2SJ CAMS Licence and CAMS Car Club Membership to enter. Click here if you do not have these items.

All Tuner Houses and Businesses are welcome to compete in the Phillcom Rally Time Attack Series 2010. Please contact [email protected] for further details.

For all information on Phillcom Rally Time Attack Round 2 July 25th 2010 please view here.

Time Attack Sponsors

Phillcom Rally

Infinity Signs

Willall Racing

Lakeview Chiropractic

Adelaide Radial Tyre

S & J Automotive

Autosport

Australian Motors Mitsubishi

Phillcom Rally Time Attack Round 2 2010

pdf-med.gifPhillcom Rally Time Attack Round 2 2010 ENTRY FORM

pdf-med.gifPhillcom Rally Time Attack Round 2 2010 SUPP REGS

Link to comment
https://www.sau.com.au/forums/topic/322723-phillcom-rally-time-attack-round-2/
Share on other sites

  • 4 weeks later...
I wish I could!! :woot: I'm booked out lol Pics or Ban Roo!! :)

p.s hope you got the front rotors? Will send the rears next week!

Yep got them thanks :D Too bad they're not going on the stag now :P

Lots like I'll be doing the time attack with bog stock brakes ... yay :P

  • 2 weeks later...
Reckon i'll head out for a look and some inspiration

Do you think a black volvo will inspire you? :)

Heading outside now to do some more work on getting the Stagea ready. Calipers finally arrived ... so I might have that brake upgrade sorted afterall. :(

Awesome event, had a blast! Pulled a PB of 1:20.78 in the S14 with stock trim and stock T28BB :-)). Well done to the organisers!

Yep ... very well run event. :)

First time out in the Stagea and I've pulled a PB of 1m32.2s in the Stagea on street tyres. Ended up running consistent 1m33s most of the day, awd power sliding around the circuit, so the limiting factor is not the driver :P Going to sort out the misfire and get better tyres and hope to get into the 1m30s. Finished 7 seconds behind WRXs with semi-slicks :P

I was 8th in the modified class before this event. With my result of 12th in the class (32nd overall out of 36), I hope not to be bumped down the ladder too much :P Damn fat-ass stageas! :P

Glad to hear you had fun! Did you end up getting any footage?

I screwed up the use of the camera a few times, but I'm downloading the vids during my lunch break (in 10 minutes or so) and I hope to post them up.

I'm sure I got the vid of my fastest lap. :)

The Stagea got noticed alot too ... lots of pics taken of the Stag in action (will hit up the photography websites later this week) ... very unusual (apparently) to Time Attack a heavy family wagon :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...