99 R34Gtr Vspec, Now Stroked!

[GTRsean]

Put it on the dyno. Got up to 272RWKW @ 14psi before we called it quits.

Water temp was going from 92 to 105 in just one run.. possible headgasket issue.

Also have to sort out sump breather hose, seems to push oil up the pipe, and into the oil/air separator plumbing and intake

[GTRNUR]

That'll ruin your day... Here's to hoping you just have an air lock in coolant system creating a hot spot and some steam.

[mico]

timing ?

[BOBBYr34]

Put it on the dyno. Got up to 272RWKW @ 14psi before we called it quits.

Water temp was going from 92 to 105 in just one run.. possible headgasket issue.

Also have to sort out sump breather hose, seems to push oil up the pipe, and into the oil/air separator plumbing and intake

Sounds like an air lock check if your heater is working a good indication for a airlock

And seems like a blocked breather !!

I hope you can work it out

[Rylan]

Thanks Brad! Yours will be a monster!!

Still have not done clutch...had to keep it on the road due to things popping up and arriving short notice . Was worth it though!

The clutch is a Nismo gmax twin plate (Brett) , that I got second hand, cleaned, inspected and rebuilt with new clutch discs.

I'm currently half way through getting brembo bits to take the brakes back to something more streetable...

New scuff plates..

Where did you get the scuff plates? They are awesome!!! Edited November 8, 2012 by Rylan

[GTRsean]

Where did you get the scuff plates? They are awesome!!!

Thanks. Got them off ebay, of all places. Then customised with stickers

Must be a big air lock!!! Never had it this bad...I'm retorquing headstuds as a precaution.

Timing was conservative as far as I know, tuner checked it on dataloggit after base timing check....

[Piggaz]

Who's tuning it Sean?

[bored33]

Who's tuning it Sean?

I know where this is going lol

[GTRsean]

Me, myself and Irene....

[Piggaz]

I know where this is going lol

??.

Was just asking fapman

[GTRsean]

Unigroup, if I can get it sorted and once (if) they have a free spot for me/fit me in....

You know with all these boats taking up valuable time and space

[bored33]

??.

Was just asking fapman

Sure, sure lol

But now you can't say anything and should tell Yoda to chop, chop! SAU nats are nearing!

[GTRsean]

Coolant system bled, oil setup and catchcan done

Thought I'd check the cam timing on the gears as it has been sluggish at low to mid RPM. Well I stuffed up, got the advance and retard settings on the gears backwards, which meant that it liked top end due to retard on intake cam and advance on exhaust.

Once I fixed that and adjusted it correctly to suit stock cams, and rechecked timing with timing light again, it's now back to it's great drivable self again...silly me!!!

14PSI is great, I'm looking forward to what it will do with 22 or so PSI into it

[SiR_RB]

Pfttt 22psi....30 is where it's at

[Deano 1]

Yea what fuel you running, e85 and some 28-30psi loving. Give it what it needs

[sinistaGTR]

commin along nicely mate

[GTRsean]

Haha...98 only Not man enough for E85 cane fuel.

Thanks Dan! Just a few little things to fix/adjust then tune

[Piggaz]

Man up the fuel system and give It some!!!! 98 is for highway driving only!

[GTRsean]

Meh, nah spent too much already!

Spat a power steering belt mid corner today on Putty Rd, scary moment!! Nearly crashed Needed to be retensioned anyways. Damn they are hard to steer with no power steering!!

[Piggaz]

Meh, nah spent too much already!

Spat a power steering belt mid corner today on Putty Rd, scary moment!! Nearly crashed Needed to be retensioned anyways. Damn they are hard to steer with no power steering!!

Try it on semis on a racetrack... hahaha