Jump to content
SAU Community

Recommended Posts

I was copied in to an e-mail...changes to the redlight cameras. I always thought they extrapolated the speed based on sequential photos and distance travelled but for what it's worth here it is...

These are the new fixed red light / speed camera locations for Perth.

"LOCATION:

CANNING HWY/RISELEY STREET APPLECROSS

WANNEROO RD/BEACH ROAD BALGA

BEACH RD/MIRRABOOKA AVENUE BALGA

ALBANY HWY/LEACH HWAY OFF RAMP BENTLEY

STIRLING HWY/ERIC STREET COTTESLOE

MORLEY DVE/ALEXANDER DVE DIANELLA

ROE HWY/KALAMUNDA ROAD HIGH WYCOMBE

WINTERFOLD RD/STOCK ROAD HILTON

HEPBURN AVE/MARMION AVENUE PADBURY

CANNING HWY/DOUGLAS AVE SOUTH PERTH

G.E.H./SHEPPERTON RD VICTORIA PARK

LEACH HWY/BUNGAREE RD WILSON

These are the up-coming locations for the new red light/speed cameras. If you speed through the intersection you will get done for speeding.

They will all be in action from June/July. .

There is one already active in front of the bell tower on Riverside Drive in the City. "

No I wasnt shouting thats how the e-mail came lol

Link to comment
https://www.sau.com.au/forums/topic/323067-redlight-cameras/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Does anybody know how these redlight cameras work? For example I go through a orange light and it turns red half way through, At what point will Camera go off? 1Sec after red? Any car less than halfway through?

I doubt they have changed the way the redlight cameras go off, if you cross the line while the light is RED, you get done.

I feel sorry for whoever slams up the back of me when I grab the anchors to stop for a late amber light instead of squeezing the gas a bit.

Does anybody know how these redlight cameras work? For example I go through a orange light and it turns red half way through, At what point will Camera go off? 1Sec after red? Any car less than halfway through?

No, these new redlight camera's Operate as normal but they will also snap you if you are speeding through the intersection when its amber, dont speed up to beat an amber and you'll be right.

Edited by Dani Boi
There's not a way to fight it, if you get done is there?

" I had to speed up cause there was no room to stop/ there were people close behind me"?

Uhh I doubt it, it's there fault that they hit you anyway :) There's no need for you to speed up when the light is amber anyway, just take it at normal speed or brake and wait.

Edited by Dani Boi

The law is the law but unfortunately, there are tonnes of plonker-f**khead drivers all over the place that'll sit up your arse to make it through an amber light only to be thwarted by you and your desire to keep your licence. As such, your car is going to literally get arse-raped.

That's the price we all have to pay. My advice - GET INSURANCE. Or move to the country where they're lucky to have one set of lights.

:banana:

Shouldn't have any drama's in any zone...in 100kmph zones, there are pre-amber warnings 100 metres ahead, and we all know the rules...if you're too close to a car to stop as quickly or quicker than that car, you're too close.

I didn't think there were 100kmh speed limits through lights?

thanks for the info

quite annoying to see WA traffic lights copping speed cameras too now just like in VIC, every 2nd traffic light is a speed camera over there..

it was bound to happen though im actually suprised it took this long.. but now that it has.. not so happy haha

I'll be sure to memories those locations :D

I doubt they have changed the way the red light cameras go off, if you cross the line while the light is RED, you get done.

I feel sorry for whoever slams up the back of me when I grab the anchors to stop for a late amber light instead of squeezing the gas a bit.

I got rear-ended by a van because I was braking for the amber instead of trying my luck to run a red. :(

The law is the law but unfortunately, there are tonnes of plonker-f**khead drivers all over the place that'll sit up your arse to make it through an amber light only to be thwarted by you and your desire to keep your license. As such, your car is going to literally get arse-raped.

That's the price we all have to pay. My advice - GET INSURANCE. Or move to the country where they're lucky to have one set of lights.

:rofl:

Exactly, I got full comp insurance & my car is getting fixed for free at the moment, but still a pain in the a** to go through the whole process again, now I'm reduced to driving around in a grandpa spec Camry :bunny:

I didn't think there were 100kmh speed limits through lights?

Tonkin highway? Although the speed limit goes down from 100km/h to 80km/h at each traffic light intersection.

Edited by Mayuri Krab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...