Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering if anyone has any info on how this works.

I was reading up on Best Tools for the Job on SAU unfortunately I don't know where to find cheap tools online. Ebay had a few reasonably priced ones from Kincrome :banana:

Anyway, is anyone familiar with the Australian Apprenticeship Tools for Life program?

It looks like the government will pay a fraction of a potential $3800 towards tools on occupations listed on the national skills register.

The skills register shows "mechanical services" on there, so I'm assuming that covers automotive mechanics.

Does anyone know how the payments work?

Are you only eligible if you buy the tools after you have started the apprenticeship?

Thanks,

Gareth

you get an $800 tool grant from the government, after 3 months of comensing your "skills shortage" apprenticeship, however it is in the form of a voucher, your boss has to sign for it and its only for tools that suit your specific trade, unless your boss is happy to pull a dodgy and sign for different tools

you are also given lump sums of money depostited dirrectly into your bank account at 6,12,18,24,36 month mark and also completion of your apprenticeship

you are also given lump sums of money depostited dirrectly into your bank account at 6,12,18,24,36 month mark and also completion of your apprenticeship

Ok cool, so the lump sums could be spent on anything. But the $800 initial grant is just for tools that your boss sign's off on....thanks :banana:

That's bullshit. I did it the hard way by paying for all my own tools, my own tafe fee's, and didn't get kickbacks twice a year :)

I know tell me about it! All the apprentices at work get this too, even the adult ones! What did I get? I got a second job doing nightfill!

i also think its disgusting that they get anything at all......take this into consideration....my former apprentice after many warnings for turning up late if at all,after over 20 paid sick days in 6 mnths so i give him the arse....then the people from the apprenticeship place rang me up to sign the form "so he can continue his schooling to get his papers without a job" so i say "how can he do this?" they say "well due to the hard economic times they can do this as there is not enough work around for them" i say "no economic crisis in my shop....im here til 12 everynight......so if he continues and get his papers....do i get my $2000 bonus when he gets his papers?????" they say "no he must be and employed at your place" i say "ok then....well dont bother contacting me as i refuse to participate in promoting bludging and i will never give anyone else an apprenticeship......and sign your own f**kin papers " and hung up :)

free tools & cash bonuses FTW! it was nice to get some free cash from the bastards that take it all anyway (tax,fine etc.). it helps with the crap wage for 4 years and everthing being so dam expensive.

free tools & cash bonuses FTW! it was nice to get some free cash from the bastards that take it all anyway (tax,fine etc.). it helps with the crap wage for 4 years and everthing being so dam expensive.

crap wage???? where do you work, and what trade? .... i wouldnt say i'm on a crap wage by any means!

its a joke apprentices get paid any bonuses everyone else works the way up through hard work or paying to go to university you get education and a wage shouldn't be complaining about anything.

not to mention how soft half the tradies are these days

oh i get payed well now im fourth year thou first year would have been better off on the dole. im a instrumention technition. plcs n shit. plus these days its hard for most young guys to keep a job! they need incentives

its a joke apprentices get paid any bonuses everyone else works the way up through hard work or paying to go to university you get education and a wage shouldn't be complaining about anything.

not to mention how soft half the tradies are these days

HAHAHAHAHAHAHA @ you .... wow, so your RIEV course took you 1 week to complete, and you just call people asking if they wanna sell their hard earned properties, whilst you then F*** them around and then take a cool 1-2 % of the sale price!

jokes on you buddy, i work f**ken hard... and to what Do-luck said, i concur... i got my hand jammed between 240mm2 XLPE's and a large metal takeoff box during a mains pull down a 30 story building (so cables weighed hundreds of kilo's) the pressure alone burst my finger right open, off to the doctor, and back to work an hour later!

so i dont want to hear im soft from a paper pusher such as yourself!

the joke would be in fact on YOU if what you said above is true, which its not. If you cant compile a decent reply that is worthwhile you may as well not bother. But enlighten me and everyone else why you are entitled to a bonus

Although you guys might be hard working i know plenty of tradies & engineers who have to put up with the majorities whinging. They built a fkn walk way out of containers so the workers on the west gate job wouldnt get rained on from the brew hut to the site? So while you might work hard a vast majority don't and are happy to admit it and openly admit they use the union and whatever other bs they'd like to come up with to not have to go to work. I for one have nothing much against tradespeople but if you cant look around and see your fellow tradespeople are like this then frankly you are blind.

the examples are endless whats is up with RDO? for what? nothing at all.

and just so you know whether you a soft or not its rather irrelevant you can work hard break ya back and be fckd by they time your 40 good for you im happy to do what im doing for much longer without the labor intensive work and get paid more than you. Ultimately sir the joke is on you in this scenario!

the joke would be in fact on YOU if what you said above is true, which its not. If you cant compile a decent reply that is worthwhile you may as well not bother. But enlighten me and everyone else why you are entitled to a bonus

Although you guys might be hard working i know plenty of tradies & engineers who have to put up with the majorities whinging. They built a fkn walk way out of containers so the workers on the west gate job wouldnt get rained on from the brew hut to the site? So while you might work hard a vast majority don't and are happy to admit it and openly admit they use the union and whatever other bs they'd like to come up with to not have to go to work. I for one have nothing much against tradespeople but if you cant look around and see your fellow tradespeople are like this then frankly you are blind.

the examples are endless whats is up with RDO? for what? nothing at all.

and just so you know whether you a soft or not its rather irrelevant you can work hard break ya back and be fckd by they time your 40 good for you im happy to do what im doing for much longer without the labor intensive work and get paid more than you. Ultimately sir the joke is on you in this scenario!

WTF, why the hate?

what are you gonna sell when they are no new homes being built ...

the majority of 1st year apprentices will be lucky to clear $300 a week.... then your have to factor in the 10-12 hours days with no paid overtime and working in conditions which are far from comfortable.

this is why there is a shortage of trades people and this is what the "bonus incentives" are trying to correct....

im on an RDO today and its great so fark you.

there is no hate at all i'm just asking, and passing on things i have been told from the horses mouth.

i have friends who are apprentices and who are fully qualified as well, yes the money sucks to start with but at the same time you are getting paid while you learn as opposed to say a lawyer who goes to university for 5 years or whatever it is and comes out with a 40k debt and has earnt less than 300p/w for the past 5-6 years. There is no bonuses along the way for them.

So dont mistake my comments for hate i just think that tradeys get more than a fair go these days and the tradespeople here are probably some of the best looked after in the world.

and i bet it it is great having an RDO but im just asking why are they given out? from what i'm told its not a day in lieu its simply a RDO every fortnight or month i'm not sure. Do you deserve that rdo? of course you will say yes. But hey everyone goes to work does over time and blah blah but they dont get paid RDO's. I could be wrong about this thats why im asking.

hahaha, you have a go at me , but you've got no idea either.... i work 40 hours a week, but i only get paid 36 hours a week, hence why every fortnight i get a paid day off. ive worked those hours, i then get them in lieu in the form of an rdo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...