Jump to content
SAU Community

Recommended Posts

G'day all,

I am an American who married a lovely woman from Australia last year and am in the process of visa approval. ( for the background)

I owned 1 motorhome at the time of marriage, and the wife talked me into getting a second one with the intent of giving one to a son who does diesel mechanics for a mine company, and keeping the second for ourselves. Both vehicles are LHD, :bunny: .. both will be over the 15 year past production age before the year ends. The plan is to transport them to our home in QLD. I am aware of the conversions required for the air con systems, the steam cleaning certs and safety inspections. I am under the impression I can maintain a LHD vehicle over 15 years old with the lovely caution sticker on the rear. I am looking for advice on the particulars of importing a 28" and 34" motor home to QLD. (Personally I would rather not worry with it but the little lady is determined to have them and its my duty to make it so) Any suggestions or advice is appreciated.

Roger W.

Link to comment
Share on other sites

yo mate how long ahve you owned either of the motorhomes???

about 6 years on the smaller one, and a bit over a year on the newer one. The newer one is in both the wife and my name, and I need to get her name put onto the older one.

Link to comment
Share on other sites

Importation is a two step process here. The car has to be eligible for import (regardless of LHD or RHD) first, and then once imported, needs to comply with Australian Design Rules and state registration requirements before you can register it.

So in your case, they can be imported if they were made in or before 1988 or if you've owned them for over a year (as a personal import).

However, cars need to be 30 years old before the LHD exemption kicks in (ADR/registration requirement, not importation requirement). I'm not 100% certain on the requirements of campervans for registration, but for cars that's certainly the rule.

Link to comment
Share on other sites

yeah what shan said

i know you are eligable to bring them in under the personal owner import scheme but as far as lhd / rhd conversion i have absolutely no idea, and will not comment on the matter in case i give wrong info... it may be different because it's a motorhome

here at SAU we tend to deal mostly with silly low suspension japanese coupe's with big wheels

i would suggest contacting either DOTARS (google it) for further info and

...whichever queensland government department handles the roads / car registration

Link to comment
Share on other sites

LHD rules are actually a state thing. it varies slightly from state to state what exactly is required. check with the state department of transport body in the state in which you intend to register the car.

if you can easily satisfy the requirements of 'personal import' then I'd suggest going that way. the approval process is a little more paperwork but after that it's easier. otherwise the pre-89 rule will still suit you.

just look into the rules on LHD vehicles in the state you are moving to.

Link to comment
Share on other sites

  • 2 months later...

You could always sell them over there & buy Australian built ones that are all compliant

& ready to go. I may even be able to help with that depending on what you want.....

>_<

Link to comment
Share on other sites

Importation is a two step process here. The car has to be eligible for import (regardless of LHD or RHD) first, and then once imported, needs to comply with Australian Design Rules and state registration requirements before you can register it.

So in your case, they can be imported if they were made in or before 1988 or if you've owned them for over a year (as a personal import).

However, cars need to be 30 years old before the LHD exemption kicks in (ADR/registration requirement, not importation requirement). I'm not 100% certain on the requirements of campervans for registration, but for cars that's certainly the rule.

Just wondering (just out of curiosity) - wouldn't a motorhome be classed as a "truck/bus"?

I've seen some modern motorhomes that are LHD with the big warning sticker - but i'm not sure if these were just (wealthy) tourists who will then take the vehicle back home once they have finished touring Australia.

I've seen one from China/HK (chinese plates + victorian plates) - It was an Iveco brand and another from Germany (euro + tasmanian plates) - that was a Mercedes.

Off topic - I've seen an Abu Dahbi plated (no Victorian plates) LHD Ferrari cruising around Melbourne area...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
×
×
  • Create New...