Jump to content
SAU Community

Recommended Posts

Preference would be to sell as a package of 6 rims

No idea on offset's, they'll be high seeing they went under an R32 pretty easy – Could try and work it out if need be

2x 18x10.5 - tires no good - minor marks

2x 18x10 - tires 80% - wear marks on the inside

2x 18x9.5 - tires 50% - wear marks on the inside

Black centre's are the 9.5's

Sany0651-1.jpg

4327248089_5f21003975_o.jpg

01012007617.jpg

01012007621.jpg

18x10.5 and 18x9.5 are 4 and 5 stud, 18x10 are 5 stud only

Located in New Farm, Brisbane QLD

$3000 for all 6 of them

Link to comment
https://www.sau.com.au/forums/topic/323502-18inch-veilside-andrew-5s-6-rims/
Share on other sites

  • 3 weeks later...

2x 18x9.5 - tires 50% - wear marks on the inside

Turns out these are really 10.5's wide as well. so updated below:

2x 18x10.5 - tires no good - minor marks

2x 18x10 - tires 80% - wear marks on the inside

2x 18x10.5 - tires 50% - wear marks on the inside



  • Similar Content

  • Latest Posts

    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Oh and how is the rattle when foot is on the clutch ?
    • Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
    • There's always "MIG it up and grind it back".
×
×
  • Create New...