Jump to content
SAU Community

Missfire Boost@4500-5500 RPM - The Answer! (for me at least!)

Nightman

By Nightman,
in General Maintenance

 Share

Recommended Posts

Nightman Explorer

Nightman

Posted
Posted

I *HAD* a miss in my R33 GTST when the air was cold out side or I put the boost up high. This happened at around 5000 RPM, after many months of chainging plugs, coils etc, I finally know what is wrong and a fix (not sure how long the fix lasts!)...

(the reason it does it more when the air is cold is the Boost was higher due to more dense air)

Note: All Coils tested FINE with a multi meter - This is not a valid test for this problem!

after a really really good examination of the coils it seems that there were lots of scorch marks and some other really small marks, which looked like the spark was jumping from the case of the coil!!! Looking VERY closely, I found that all bar 1 of my coils have a hairline (almost invisible) crack on the front of the coil! (I will post a decent picture later):

          ~~~

         --|  <--- Ignition Plug

  ~~~~~~~~~~

 ~~~~~~~~~~~~

 ~~~~~~~~~~~~ 

  ~~~~~~~~~~ <--- Crack Here! Top to Bottom and on Some, Into Plug Tube

  ~~~~~~~~~~

         ~~

         ~~ <--- Spark Plug Connection

         ~~

(Sorry about my Crappy ASCII Picture!)

What I did was tape the lower half of the coil.

          ~~~

         --|  <--- Ignition Plug

  ~~~~~~~~~~

 ~~~~~~~~~~~~

 ~~~~~~~~~~~~ 

  ~~~~~~~~~~ <--- Tape here

  ~~~~~~~~~~

         ~~

         ~~ <--- All the way to here

         ~~

I no-longer have a miss!!... I put the boost up even more then before, and still no miss!! - this morning was nice and cool outside on the way to work - still no miss!!!

Anyone having problems with missing, just tape the coils you already have, use a REALLY good Stretchy Electrical tape... not the 25c crap you can buy (this was useless!) - I will have to try and find some high temp non-conductive glue and try it some time too!

  • Replies 430
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

SLY33
SLY33

developed a pretty bad miss from 4grand up, well its more like a rev limiter sound after 4 grand! other than that it drives normal. Suspect its a coil or even 2 coils seeing as the miss is so bad. I

GTofuS-T
GTofuS-T

MrStabby just posted this video in a different post and thought it was very relevant to this thread. (Can't seem to embed it) http://youtu.be/Qirx_G4x5i0

Mitch_Dubya
Mitch_Dubya

Here's a pic of the coil that was arcing out on me. Running down the side and arcing to the head of the bolt.

Posted Images

tenzero Contributor

tenzero

Posted
Posted

Nice work in solving this problem mate. :)

I have a very similar problem and will try it out.

Was the electrical tape you used just pvc electrical tape? or the rubber tape from 3m that can be streched about 50% and is not sticky like normal tape??

Cheers.

D.

Nightman Explorer

Nightman

Posted
  • Author
Posted

tenzero: PVC Tape, but a good brand one. - Theres just some really crappy tape that does not stick... and because the coil is tapered, its hard to make it stick...

sewid: Code tags made it better but still not 100% :)

When I find a Dig. Camera I will take some shots :) Waiting for the work camera to come back! ;)

JimX Grand Master

JimX

Posted
Posted

Well it looks like you've already helped 2 people solve this problem. Does anyone know how they crack to begin with though? Is it just heat that stresses them out? Might be worthwhile setting up some sort of ventillation for the centre cover, especially in summer.

Zahos Mentor

Zahos

Posted
Posted
How is a safc gonna fix faulty coils?

sure, it might mask the problem by changing the fuel ratio so as the spark is easier to make, but the problem will still be there and eventually get worse and catch up to ya! IMO Anyways...

Sorry, I guess you mis understood.

The problem with boosted R33's is that they run mega rich, and the ignition maps go all over the place, so you will definately get a misfire, or loss in power at the 5000rpm range with standard management. A SAFC corrects this problem. Once the A/F are laned out, the ignition maps start to look better, and you won't see this problem.

It looks like with cracked coils the problem is more evident. I dunno if my coils are cracked, but ever since the SAFC was installed, it has run like a dream. I'll have a look at my coils anyhow, coz the misfire I used to get was quite shocking....

Anyhow, good work on that discovery, but what I'm trying to say is that the problem goes much deeper than that... Some form of aftermarket management is definately needed on any modded R33!

Zahos

Zahos Mentor

Zahos

Posted
Posted
Zahos: Ahh, yes.  If you boost up you can expect things like that (ECU goes into Safe mode - FILLER UP! :D)... But, I also *USED* to get a miss under normal boost in cold weather... Changing the Plug gap made it slightly better only!

Ahhhh -> "normal boost"

You're first post implied this, but coz I'm so used to hearing about misfire @ > stock boost, I guess I missed it....

Cecam Enthusiast

Cecam

Posted
Posted

The coils get pretty hot under that cover and probably overheat, for an R33 S2 just remove the cover, for series 1 I used one of the ignitor bolts into one of the cover bolt holes to keep that still, and same for R32's (remembering they have earth wires on the ignitor, R33's are down by the coil brackets). Appears to help some cars... sure it looks abit more ugly but the coils ain't frying anymore...

ABuSD Veteran

ABuSD

Posted
Posted

Hey fellas i have an SAFC and i think i may have the same problem!!

And ive just had it tuned also :D (by a very respected tuner)

Thing is he tuned my car on a 27degree day and it gets worse when the weather gets colder!

Maybe its not a miss??

I also get a pop out of my zorst in between gear changes is that related??

Cheers

Abo Bob Grand Master

Abo Bob

Posted
Posted

Just thought I'd let you all know. My issue turned out to be the Crank Angle Sensor.

I tried new plugs, then new coils (luckily had an identical car nearby that worked) but Crank Angle Sensor it turned out to be!

My car is an r34 GTT btw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...