Fs: R33 Gtr Exhaust & Front Driveshafts

[krzysztof]

Item: R33 GTR Exhaust (no front pipes)

Age: unknown - was on the car when i purchased it

Condition: used but no major defects

Price: $400 or best offer

To Fit: R33 GTR, could possibly fit other skylines but im not sure

Location: Boronia, VIC. can freight aus wide.

Contact: Chris via PM.

Not sure what brand/type of exhaust it is but the cat has a 2 bolt flange with 3.25" pipe each end, first section of the exhaust is 3.5" to the centre muffler, then 3.75" to the rear cannon which is 7" with a 4.25" tip. Its a good quality and well flowing exhaust and the car was making a comfortable 300kw+ with basic mods when installed, it isn't droney and reasonably quiet compared to some GTR exhausts.

Item: R33 GTR front driveshafts

Age: unknown - were on the car when i purchased it

Condition: they're not new but cv's aren't noisy and still good

Price: $100 for both or best offer

To Fit: R33 GTR, possibly R32/R34 GTR

Location: Boronia, VIC. can freight aus wide

Contact: Chris via PM.

These were replaced as i suspect faulty shafts however turned out they were fine.

[krzysztof]

have some interior bits too..

and long story short but turns out these shafts have been reco'd in the last few yrs so they're good shafts. wreckers quoted me 400+ for driveshafts people so buy buy buy!

Item: S1 R33 GTR 5 Speed Centre Console Surround

Age: who knows..

Condition: its in very good nick no tears/scuffs on leather, ash tray has been cut out for (hidden) ebc.. not sure if ciggy lighter works.

Price: $50 or best offer

To Fit: R33 Skyline

Location: Boronia, VIC. can freight aus wide

Contact: Chris via PM.

Item: S1 R33 GTR Instrument Cluster Surround

Age: prob 15yrs id say..

Condition: mint

Price: $20 or best offer

To Fit: R33 Skyline

Location: Boronia, VIC. can freight aus wide

Contact: Chris via PM.

[krzysztof]

instrument cluster and manual surround both SOLD.

driveshafts and exhaust still fs.

[krzysztof]

bump

[usmair]

mate have u turned yr 33 into a RWD?

[krzysztof]

mate have u turned yr 33 into a RWD?

nah mate i just had a vibration from front end thought it was the shafts so replaced them as my first stab in the dark...

[krzysztof]

Nissan OEM Idler Assembly. Like new, $50.

3m 3/4inch (19mm) Petrol/Oil Delivery Hose. $20

[krzysztof]

bump ze zorst back up..

[krzysztof]

ok.. the exhaust goes on eBay this week

[snozzle]

does the gear boot have any tears/rips marks on the other side of it?

[krzysztof]

gear boot and console are sold mate.

i still have:

- exhaust

- driveshafts

- tensioner

- catch can hose

[lukesz]

anyway you could confirm that those drive shafts fit an r32 gtr? if so im keen.

[krzysztof]

anyway you could confirm that those drive shafts fit an r32 gtr? if so im keen.

i dont know 32s but i'd put my money on them going in.. its same motor/sump and most likely the same hub.

ive done a quick search on here and couldn't find much, best way to do it is to take your shafts out and compare em

[krzysztof]

got some more pics of the exhaust:

[krzysztof]

exhaust is sold. i still have driveshafts and tensioner.

[krzysztof]

catch can hose has been used for other purposed.

driveshafts and tensioner thats all i got..

[krzysztof]

also have some snap on seat covers: $100 for the pair, or shoot me an offer - they're 160 or 180 from the snap on truck..