Jump to content
SAU Community

Recommended Posts

the smic vs fmic has been debated TO DEATH already

yes any core (or no core at all) can dyno 200rwkw or even 300rwkw

its the repeated loading it up on the street which is where the fmic will walk away from the smic

given his ambient temps the bigger the core, the better

the smic vs fmic has been debated TO DEATH already

yes any core (or no core at all) can dyno 200rwkw or even 300rwkw

its the repeated loading it up on the street which is where the fmic will walk away from the smic

given his ambient temps the bigger the core, the better

sure, but calling it a gigantic waste of money and time is a bit of exaggeration.

They can easily withstand mild modification if a fmic isnt an option (be it legality or fitment issues)

ARC, Trust and Nismo all designed aftermarket sidemounts and no doubt did extensive testing to support their reason for production of these.

ok lets get it back on topic.

It's my choice to SMIC so we will leave it at that.

How can i tell if the coilpacks are dying?

you start misfiring over 4000rpm and (in my case) would misfire when car had been driven for 30mins+ and had warmed up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Isn't this what everyone immediately sees in their mind's eye when someone gives them a total width number and an offset?
    • It won't be this - not while it's driving, anyway.
    • when does it run badly; hot/cold/both, idle/part throttle/full throttle what computer is running it and what data can you get from it?
    • Perhaps, and it's deceptively similar. I was yesterday days old when I first heard anyone mention that the default guards have exactly XXXmm space. No more "is 8.5+37 going to be flush/fit, or will it poke? how much? 9.5 +16.9?" etc. Can just do maths and subtract from 100 - Shit, Wheels should have this measurement stamped on them. "This wheel extends 74mm from the hub in one direction and 57mm in the other" This is a far better system than offset, inches, and backspacing.  
    • Hi guys, I know I lt could be a range of issues although when driving my gtr its starts sputtering and stalling feels like maybe an inter cooler pipe loose or so but that's not the case. recently had a comp check with 165psi across all 6 give or take a few psi. a mate was saying maybe IAC valve  could anyone point me in the direction of where to go from next I was thinking coils / plugs.   its due for an upgrade so I'm going to r35 coils. In the mean time I'm Just wanting to get it running alright    cheers 
×
×
  • Create New...