Jump to content
SAU Community

Recommended Posts

top quality cars top quality price

i haven't heard anything else so if your gut it ok then go for it

don't bother with the 3 yr extended warranty 95% of what could go wrong with the car isn't covered it should take about $900 off the cost

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282389
Share on other sites

about 7 years ago there werent very good stories but from what i have heard over the past few years has been really good reps as long as the car checks out with a mechanic then go for it but i agree with steve dont get the warranty there is no point and it will save you a few $$$$

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282429
Share on other sites

People say that they have heard bad stories from Redline. But my R32 was sold by them back in 2002, and Vince from Import Compliance Systems has been over it and said its one of the the best GTSt's he has seen to date... Would I buy a car from Redline? Yes.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282487
Share on other sites

Ok, first of all the topic title "Dealer" is just stupid - you need to make the title state exactly what the topic is about, and what you want to ask.

Secondly this has been covered 1,000,000 times before .... ALWAYS use the search function.

Thirdly, the guys selling at Redline have always struck me as arrogant fools, and the cars are stupidly overpriced IMHO.

That is all.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282534
Share on other sites

What are peoples impression for Redline Motorsports?

I'm looking at buying a car from them tomorrow!!!!!!!!!!

What car you after exactly? Id trowl through car sales and call a few that you like (interstate also), always ask the relevant questions ie service history, auction papers, export certificates etc

If you have a good feeling then organise an inspection through a mechanic, RAA or state roads depending on where the car is located. All goes well, seriously think about purchasing.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282604
Share on other sites

Paid top price for my 33 through them.

Had to go back twice for majour warranty repairs, both times the repairer tried to sell me on extras and both times the repairs were not carried out to satisfaction.

That being said they gave me a lot more for my trade-in than I was expecting, and the guys provided great pre-sales service and reasonable after-sales, car was presented very well and I suspect it had a cheapo respray after landing here which is now starting to flake in some spots, although I can't say for sure that was thanks to Redline.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5283550
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
    • Slap it and say it ain't going no where, you'll be fine.
    • So the whole rb25de neo setup was a tiptronic setup and i swapped everything over to my rb20de neo setup and yes even the cluster of the rb25 was swapped over. 
×
×
  • Create New...