Jump to content
SAU Community

Recommended Posts

Hey guys,

Time for me to get something a little more subtle/and maybe pay a chunk off my home loan if i can get a cash sale - I am very negotiable for cash :laugh:

Details on Build are as follows:

Engine/Driveline:

RB26/30DET 40 over thou

Ross forged flat top pistons

Ross forged H beam rods

ACL race series bearings

ACL race series rings

cryo'd and blueprinted crank

Custom high volume gated sump

Blueprinted and decked block

oil galleys, water galleys all bored and cleaned

new plugs throughout block

cometic 3mm metal head gasket

head acid bathed and decked

relinished cams

tomei stoppers

titanium springs

tomei valves and honed larger seats

Adjustable cam gears

ventilated lightweight flywheel

carbon ceramic clutch

rebuilt rb25 5 speed

custom tailshaft

KAZZ 2 way diff

KAZZ axles

FUEL SYSTEM

GTR in tank feeder pump

Custom 2l swirl pot

Bosch 044 main pump

Sard fuel regulator

HPI billet fuel rail

Cusco 700cc injectors

all barided lines and speedflow fittings used

Engine management

Autronic SM4 - top of the line controls everything

All hidden wiring to keep it tidy

Turbo/exhaust

Garrett GT35/40R with a 1.06 rear housing

stainless manifold all ceramic coated and heat treated

Full custom 4" stainless exhaust from the turbo

Intake/keeping cool

K&N filter

full stainless intake into turbo

Full stainless intercooler piping

PWR 100mm intercooler

Custom stainless extra large instake plenum with trumpets inside

100mm alloy Throttle body

PWR 40mm Radiator with custom shrouding - never gets hot

Suspension

Tein racing coilovers

Cusco strut braces front and rear

Cusco Sway bars

Drift pineapples

Adjustable arms - castor, camber, toe - fully adjustable

Body/Interior

Full rotisserie respray in solid Skyline blue

GTR interior, front and rear

nardi racing wheel

Full genuine GTR Front end

full stereo including sub (can be easily removed)

Rare rear window roof lip/wing

There are alot of little things that i have forgotten, guages, all of the custom things like catch cans, resivoirs etc all done in stainless...

Anyway this car is an animal to drive, and is equally at home on the track as it is prowling the streets.

Asking $18,000 or make a reasonable offer, will look at r34/GOOD r33's for swap or maybe a dual cab ute??

PM me on here with your number and i will MMS you pics, i dont have any on my work computer :)

Cheers for looking guys

Link to comment
https://www.sau.com.au/forums/topic/324187-r32-sedan-crazy-setup/
Share on other sites

hey guys, like i said i cant get pics up from here until i get the digital cam, i can MMS you pics if you PM me your number, Wilba now has pics :)

Got it tuned yesterday again, we ran 700HP, then tuned it back to 500hp and 1770nm of tourqe...it was wheelspinning on the dyno and we had 3 big guys sitting in the back, this is no car for the faint hearted if you are throttle happy!!!

Also purchased RWC yesterday so it is ready to go, and all legal!!!

hey guys, like i said i cant get pics up from here until i get the digital cam, i can MMS you pics if you PM me your number, Wilba now has pics :banana:

Got it tuned yesterday again, we ran 700HP, then tuned it back to 500hp and 1770nm of tourqe...it was wheelspinning on the dyno and we had 3 big guys sitting in the back, this is no car for the faint hearted if you are throttle happy!!!

Also purchased RWC yesterday so it is ready to go, and all legal!!!

hey mate very keen on a swaps, i have a 2000 wrx with some work done, it also has custom green respray, wheels bodykit etc. ring for more details and to send through some pics 0400773612

selling up already timmy MY OLD SKYLINE you have only had this for just 2 weeks

this is a 25/30 set up with 26 cam covers

they are not cusco injectors Try rockchester 680cc's

all piping is alloy

exhaust is not stainless its steel

the pistons are CP

are not titanium springs

does not have tomei stoppers

are not tomei valves

gear box has not been rebuilt

has not had a rotissery respray

strut braces are KTS brand

has GTR Front bar and bonnet only HAND Flared front GTST Guards

it is NOT a PWR Radiator it is a chinese alloy rad with standard fan and shroud

manifold is not stainless it is steel

intake manifold is alloy

the paint is not solid skyline blue it is ford focus blue

it is not a sard fuel reg it is a magnafuel reg

are not KAZZ Axles but standard skyline axles

  • 3 weeks later...

WHOA Sorry my bad I was sure I had seen that screen name trying to sell another rb26/30 for 10k with barely any information

This guy is okay someone please buy this

Good luck with the sale and sorry again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...