M35 Window Motor Drivers Side.

[Angus Smart]

If someone has one, can they take a photo of the wiring section where it enters the section of the plastic part (near the motor) should be 6 wires.

the guys next door to my work would like that. since my car only has some shit non stock motor they couldnt work it out.

thanks

[Jetwreck]

I just want my drivers side window to work full stop

got other bit's in the pipeline that are much more important though

[Angus Smart]

haha they had my car apart yesterday trying to fit some new nissan motor in there. he had it fitting and up and down working but the auto didnt work..

so he needs to see a stock one! pull yours out!

[Jetwreck]

I tried to pull just the motor out....the f#$king cheap arse screw's stripped the head.

If I get time on the weekend I'll angle grind of the tips.

btw how much is it costing to get it working? I don't give a shit about the auto up/down anymore....I just want my window to work!

[scotty nm35]

Large side-cutters do a great job on most stripped screws and nuts Craig, are you a butcher by trade?

[Angus Smart]

not too sure about cost. the companys called electric life. they are fairly cheap i think.

[chad bob]

I heard that most drivers side window failures happen due to the motor brushes packing up. I bought an R33 power window motor from the wreckers for $20, swapped the brushes out with the knackered ones in my M35 and the window goes like new. No need for re wiring, the motor comes apart with two screws either side of the armature housing.

[Stagea Gazza]

I heard that most drivers side window failures happen due to the motor brushes packing up. I bought an R33 power window motor from the wreckers for $20, swapped the brushes out with the knackered ones in my M35 and the window goes like new. No need for re wiring, the motor comes apart with two screws either side of the armature housing.

Similar thing happened to me. Driver's window got stuck in the down position and after taking off door panel found one hot window motor. Did a recon on the motor and its running again but I don't think much life remaining on the brushes.

Good to know that we can use the brushes from an R33 unit. Thanks.