Help With R34 Coilovers

[PewPew]

Soooo....The car was imported from Japan with the C spanners thrown in the glove box and the rear noticeably lower than the front

I did a search on both SAU and Google but all I found was people asking about measurements.. was hoping someone on here knew where I could find some detailed instructions as to how to adjust ride height?

Any help would be greatly appreciated

Thanks

[FLN75S]

Its pretty simple, if you take the wheel off you will see where the c spanners need to go to loosen the nuts then its just a matter of winding the springs up or down with the nut then locking them back into place once done.

[Hanaldo]

Or Tein Flex are compatible with the EDFC, get one of those and do it electronically

[GTS-t VSPEC]

Or Tein Flex are compatible with the EDFC, get one of those and do it electronically

EDFC controls the damper rates, not the height!

[Hanaldo]

Oh I assumed it controlled everything... Well... Ignore my post then

[GTS-t VSPEC]

Oh I assumed it controlled everything... Well... Ignore my post then

You know what happens when you assume

EDFC = Electronic Damping Force Controller

[Hanaldo]

Yeh i knew that as well lol... I'm not really sure why i assumed it controlled everything...

[syfon]

Dude it's so easy to adjust the ride height with coilovers. Just take the wheels off and you use the "C" spanner (or sickle spanner as I call it ) to loosen the small & large "screw" type things around the coil. If you want the car lower, literally lower the screws on the coil and then tighten the large and small ones together and vice-versa.

[PewPew]

Ah thanks for the replies. Just havn't done it before and didn't wanna break anything! Will have a go tmr afternoon

[Ehgriez]

its a pain on your own, get a mate to help, cos itll be up and down a couple time to get it right.