Jump to content
SAU Community

Recommended Posts

hey,

i just bought an R32 GTST type-M with Hicas.

The vehicle drives and handles quite well untill you hit approx 80km/h then it developes a really bad shaking through the steering wheel. Sometimes it is fine untill i hit a bump and then it starts. Also when you are braking you can feel it through the pedal.

I have been underneath the car and had a look to see if any of the bushes have any obvious wear out of them, but all appears fine. I know the shocks were shagged so i have changed them and put coilovers in and it still happens.

I have rotated rims front to back. Still happens.

Im thinking the tie rod ends may be knackered? But any input would be greatly appreciated.

cheers Ben

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/
Share on other sites

Get the suspension checked out, could be tie rods, or your wheel alignment could be totally fuba, amongst other things. I had wheels shake on my front at around 100kms/hr. Turns out both from wheels were out 30gs each. Balanced problem solved.

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5286067
Share on other sites

Have you got hub locator rings or do the wheels fit the hob correctly?

Have you taken your wheels to a tyre place to check that they are all balanced correctly?

How is your tyre ware, all even

It could be your tie rod ends, ball joints or wheel bearings?

I would suggest taking it to a tyre/suspension place to get it checked it out

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5286081
Share on other sites

  • 2 weeks later...

mate if you can feel it through braking

your discs may be warped

i had the same problem, and i replaced my rotors and pads and the problem was gone

if you cant afford to replace rotors n pads then, ask a shop to machine the rotors, its much cheaper

let us know how it goes

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5307997
Share on other sites

hey,

i just bought an R32 GTST type-M with Hicas.

The vehicle drives and handles quite well untill you hit approx 80km/h then it developes a really bad shaking through the steering wheel. Sometimes it is fine untill i hit a bump and then it starts. Also when you are braking you can feel it through the pedal.

I have been underneath the car and had a look to see if any of the bushes have any obvious wear out of them, but all appears fine. I know the shocks were shagged so i have changed them and put coilovers in and it still happens.

I have rotated rims front to back. Still happens.

Im thinking the tie rod ends may be knackered? But any input would be greatly appreciated.

cheers Ben

i had a very similar problem on my 34, checked all the same things - turned out to be that one of my front brakes were sticking (seized) on and often wouldnt start to shake until it got up to speed, jack the front up and see if its difficult to turn the wheel by hand

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5315389
Share on other sites

i got a wheel alignment done today, and the shake is still there ay 80km/h now but i can accelarate through it and now it doesnt do it under brakes.

I think im going to change the tie rod ends anyway as they are quite old, so ill see what happens when i do this. I checked the steering arms and these are all straight and the wheels all turn freely.

Also i just chucked in a Hicas lock bar which instantly made it better even without the alignment. So next im going to get the wheels balanced.

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5317405
Share on other sites

  • 3 weeks later...
i got a wheel alignment done today, and the shake is still there ay 80km/h now but i can accelarate through it and now it doesnt do it under brakes.

I think im going to change the tie rod ends anyway as they are quite old, so ill see what happens when i do this. I checked the steering arms and these are all straight and the wheels all turn freely.

Also i just chucked in a Hicas lock bar which instantly made it better even without the alignment. So next im going to get the wheels balanced.

Get the wheels balanced. Also get them to check for any deformity in the rim (slight buckle) that a wheel alignment may not pick up too well.

Doesn't sound like tie rods, as you'll get it shaking under heavy braking.

:woot:

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5352009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Of course you can. That was a waste. Straight down one oil drain gallery and out the sump hole. Could at least have run the engine a little (obviously with at least minimum oil level on the stick).
    • Oh really? Maybe I'm being silly. I'll get some more shots. I had it higher but found that it went too high after a drive, I never knew this but exhausts can move around a bit when hot (makes sense, just never knew) and when it was higher it would make nice cooking plastic smells. That said, I could put some heat tape on a'la 90's R33 exhausts     Ha, I've spent a lot of my life in castle hill waiting for cars to be done. I think I'd prefer something closer but thanks D. 
    • @Duncan Yes, changed filter every time. I don't have the service manual for the car yet (Car was imported and they removed everything when importing). I've been using the oil change threads in the forum as reference.   @Milkmun The second oil change was after ~4 months after the first months and I wasn't sure about reusing engine oil that was opened. The third oil change happened within 3 weeks of the second oil change and I used the previous leftover oil to just "clean up" the system. (Poured it through while the sump plug was open")
    • I left the ceramic coating off this bit, hopefully it just comes off after a few drives.   The gap between the spokes is too tight for anything on a stick, its only marginally bigger than my finger. I have to use a brush to get in there and its a big reason why I thought I'd try the coating.   Absolutely will do. I have EBC Blue Stuff pads to put on the front which will make them a bit dirtier. I'm hoping a pressure wash will just get most off. The shine is different to most, its very thin but seems very well 'attached' so hopefully it lasts.   
×
×
  • Create New...